trend

Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin buil...

Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin buil...

Template thickness should be 5mm thicker than cut length of cutter. Can be used to rout both tenons and housings.

Template thickness should be 5mm thicker than cut length of cutter. Can be used to rout both tenons and housings.

Recessing cutter for producing double rebates. For producing recesses with a lower rebate. Designed to accept library/bookcase strip. Specifically...

Trend Craft Pro 1/4in shank recessing cutter - 20mm width Two Flute Carbide tips. Specialist cutter to cut double rebates for fitting Tonk strip bo...

Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges. Corners will require final trimm...

Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges. Corners will require final trimm...

Purpose made for stair housing jigs. Ensures tight fit of tread in string.

These specially designed machine bits have a specially designed form of scriber to allow use at high speeds. For recessing circular hinges. For a...

A complete cutter set for producing matchlining. Jointing parts are interchanged on the arbor to change the mode of the cutter. Set Ref. C255 can b...

A complete cutter set for producing matchlining. Jointing parts are interchanged on the arbor to change the mode of the cutter. Set Ref. C255 can b...

Classic skirting board mould.

The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded.

The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded.

Designed for sash bar window construction.

Enables curved frames to be moulded.

Enables curved frames to be moulded.

For door and window construction, decorative panelling and many other joinery applications. Designed for 44mm timber thicknesses.

An initial cut with a straight cutter is required to produce the drawer pull profile. 1/2" shank 38mm diameter drawer pull twin flute TCT cutter. M...

An initial cut with a straight cutter is required to produce the drawer pull profile. 1/2" shank 45mm diameter drawer pull twin flute TCT cutter. M...

Self guided with low profile ball bearing guide and bearing fixing screw. For use in restrictive applications or within rebates of minimum 8mm. ...

Specially designed tools for aluminium composite cladding material such as Alucobond, Dibond which comprises an aluminium cover with polyethylene c...

Used to slot and trim low melting point plastics such as ABS, Styrene and PVC. For maximum life these cutters are Solid Carbide. Single flute f...