trend

Trend Craft Pro 1/4in shank bearing guided flush trimming cutter - 12.7mm diameter Two Flute Carbide tips. Two flute carbide TCT tips for clean, p...

Self guiding cavetto style cutter, which follow the board edges for straight or curved work radius.

Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid cu...

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood ...

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood ...

For producing ovolo and rounding over edge moulds, using a side fence or back fence.

For producing ovolo and rounding over edge moulds, using a side fence or back fence.

For producing ovolo and rounding over edge moulds, using a side fence or back fence.

Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees.

Ideal for following template. It is advisable that the template is at least 5mm thicker than the cut length of the tool.

This 'roughing' trimmer, leaves an overhang of 3mm, for secondary final trim.

Three flute self-guiding for extra fine trimming of laminate or plywood overlay.

Cuts out apertures in laminate worktops. The nose of the cutter acts as a guide follower.

Ideal for posts and newel caps for stairs.

Ideal for posts and newel caps for stairs.

Ideal for posts and newel caps for stairs.

Attractive edge moulds.A full corner bead can be produced by making a second pass at 90 degrees.

For decorative panel and veining work. Ideal for carving with the Routerlathe.

For panel and veining work. Ideal for barley twists using the Routerlathe.

These two wing Tungsten Carbide Tipped slotting cutters are ideal for grooving and rebating operations. A 12.7mm diameter bearing is supplied with...

These two wing Tungsten Carbide Tipped slotting cutters are ideal for grooving and rebating operations. A 12.7mm diameter bearing is supplied with...

These two wing Tungsten Carbide Tipped slotting cutters are ideal for grooving and rebating operations. A 12.7mm diameter bearing is supplied with...

These two wing Tungsten Carbide Tipped slotting cutters are ideal for grooving and rebating operations. A 12.7mm diameter bearing is supplied with...

These two wing Tungsten Carbide Tipped slotting cutters are ideal for grooving and rebating operations. A 12.7mm diameter bearing is supplied with...