Skip to content
About Us – Northants Trade Contact Information Advice & Guides
Trade Prices. Maximum Choice.
Trade Prices. Maximum Choice.

Trend

Sold out
£54.84 - £54.84
£54.84
£54.84 - £54.84
£54.84

C056AX1/2TC - Trend CraftPro 1/2" TCT 9.5mm Radius Draining Groove Router Cutter, 19mm x 32mm

Trend
Out of stock

Tungsetn Carbide Tipped 2.0mm micro-granular tips for extra-long cutter life. Highly Ground Tip Face polished to 800-grit ensures accurate cutting...

View full details
£54.84 - £54.84
£54.84
£54.84 - £54.84
£54.84
Sold out
Sold out
£32.53 - £32.53
£32.53
£32.53 - £32.53
£32.53

C043X1/2TC - Chamfer V groove cutter angle=60 degrees

Trend
Out of stock

For veining, panelling, 'V' grooving, bevelling & chamfering.

£32.53 - £32.53
£32.53
£32.53 - £32.53
£32.53
Sold out
Sold out
£4.07 - £4.07
£4.07
£4.07 - £4.07
£4.07

WP-T10/085 - Thumb knob male M6 x 15mm T10

Trend
Out of stock

Thumb knob male for the T10 router.

£4.07 - £4.07
£4.07
£4.07 - £4.07
£4.07
Sold out
Sold out
£179.89 - £179.89
£179.89
£179.89 - £179.89
£179.89

WP-CNCY/040 - Replacement Touch Screen for 7 inch SmartBench Console

Trend
Out of stock

Replacement touch screen for 7 inch Trend Yeti SmartBench consoleCompatible with all 7 inch SmartBench consoles.

£179.89 - £179.89
£179.89
£179.89 - £179.89
£179.89
Sold out
Sold out
£24.66 - £24.66
£24.66
£24.66 - £24.66
£24.66

3/21X1/4HSS - Two flute cutter 6.3mm diameter

Trend
Out of stock

These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will...

View full details
£24.66 - £24.66
£24.66
£24.66 - £24.66
£24.66
Sold out
Sold out
£21.24 - £21.24
£21.24
£21.24 - £21.24
£21.24

C012X1/4TC - Two Flute Cutter 7.9mm diameter

Trend
Out of stock

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood ...

View full details
£21.24 - £21.24
£21.24
£21.24 - £21.24
£21.24
Sold out
Sold out
£11.35 - £11.35
£11.35
£11.35 - £11.35
£11.35

AB/QTR1/80Z - 115 x 107mm 6-Hole 80G Quarter Sheet Sanding Pad, 10 Pack

Trend
Out of stock

High-performance, multi-material abrasives suitable for wood, paint, plastic, filler, plaster and metal. Available in 40, 60, 80, 120, 150, 180 and...

View full details
£11.35 - £11.35
£11.35
£11.35 - £11.35
£11.35
Sold out
Sold out
£2.36 - £2.36
£2.36
£2.36 - £2.36
£2.36

WP-T5/024 - Cable guard

Trend
Out of stock

Replacement cable guard for the T5.

£2.36 - £2.36
£2.36
£2.36 - £2.36
£2.36
Sold out
Sold out
£51.47 - £51.47
£51.47
£51.47 - £51.47
£51.47

53/30X1/2TC - Shear cutter

Trend
Out of stock

Tungsten Carbide Tipped. Two flute cutter with a positive shear angle (down-cut) for fast cutting and fine finish. Ideal for grooving & trimmin...

View full details
£51.47 - £51.47
£51.47
£51.47 - £51.47
£51.47
Sold out
Sold out
£71.86 - £71.86
£71.86
£71.86 - £71.86
£71.86

CSB/CC25440 - Trend Wood Mitre Saw Blade 254mm x 30mm x 40T

Trend
Out of stock

A range of tungsten carbide tipped blades for cross-cutting wood and wood-based materials using Mitre and Radial Arm saws. Ideal for timber skirtin...

View full details
£71.86 - £71.86
£71.86
£71.86 - £71.86
£71.86
Sold out
Sold out
£79.52 - £79.52
£79.52
£79.52 - £79.52
£79.52

34/61X1/2TC - Intumescent cutter set 15mm x 4mm x 27.05mm

Trend
Out of stock

Bearing guided intumescent strip cutter for routing the groove for intumescent strip in a frame or door. Two sizes available to suit 4mm thick stri...

View full details
£79.52 - £79.52
£79.52
£79.52 - £79.52
£79.52
Sold out
Sold out
£48.04 - £48.04
£48.04
£48.04 - £48.04
£48.04

C057X1/4TC - Radius 11.1mm radius x 22.2mm diameter

Trend
Out of stock

These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of...

View full details
£48.04 - £48.04
£48.04
£48.04 - £48.04
£48.04
Sold out
Sold out
£4.03 - £4.03
£4.03
£4.03 - £4.03
£4.03

CSB/BW27 - Craft bush washer

Trend
Out of stock

Bushing washers supplied to reduce bore diameter for certain makes and models of saw. The bushing washers must be pressed or glued into blade bod...

View full details
£4.03 - £4.03
£4.03
£4.03 - £4.03
£4.03
Sold out
Sold out
£46.97 - £46.97
£46.97
£46.97 - £46.97
£46.97

11/5X1/4TC - Chamfer V groove cutter 60 degrees

Trend
Out of stock

Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose.

£46.97 - £46.97
£46.97
£46.97 - £46.97
£46.97
Sold out
Sold out
£63.78 - £63.78
£63.78
£63.78 - £63.78
£63.78

46/19X1/4TC - Double Overlap cutter

Trend
Out of stock

Roughing cutter which leaves an overhang of 3mm, for secondary final trimming.Life can be extended by varying height of cutter.

£63.78 - £63.78
£63.78
£63.78 - £63.78
£63.78
Sold out
Sold out
£2.41 - £2.41
£2.41
£2.41 - £2.41
£2.41

WP-VJS/06 - Varijig end cap for extrusion

Trend
Out of stock

Replacement extrusion end cap for the Vari jig.

£2.41 - £2.41
£2.41
£2.41 - £2.41
£2.41
Sold out
Sold out
£32.46 - £32.46
£32.46
£32.46 - £32.46
£32.46

WP-T12EL/046 - Carbon Brush 110V (1 Pr) T12

Trend
Out of stock

Pair of carbon 110V brushes for the T12 router.

£32.46 - £32.46
£32.46
£32.46 - £32.46
£32.46
Sold out
Sold out
£54.43 - £54.43
£54.43
£54.43 - £54.43
£54.43

CSB/CC19060T - Trend Wood Cordless Mitre Saw Blade 190mm x 20mm x 60T

Trend
Out of stock

A range of thin kerf tungsten carbide tipped blades for cross-cutting wood and wood-based materials using cordless Mitre saws. Ideal for timber ski...

View full details
£54.43 - £54.43
£54.43
£54.43 - £54.43
£54.43
Sold out
Sold out
£11.22 - £11.22
£11.22
£11.22 - £11.22
£11.22

SNAP/CS/10 - Trend Snappy Countersink with 1/8 (3.2mm) Drill

Trend
Out of stock

Trend Snappy 9.5mm diameter countersink - with adjustable drill 9.5mm diameter countersink for up to 10 gauge Imperial screws. The perfect, fast ...

View full details
£11.22 - £11.22
£11.22
£11.22 - £11.22
£11.22
Sold out
Sold out
£13.98 - £13.98
£13.98
£13.98 - £13.98
£13.98

AB/150/120A - 150mm 120G Random Orbital Sanding Disc, 10 Pack

Trend
Out of stock

High-performance, multi-material abrasives suitable for wood, paint, plastic, filler, plaster and metal. Available in 40, 60, 80, 120, 150, 180 and...

View full details
£13.98 - £13.98
£13.98
£13.98 - £13.98
£13.98
Sold out
Sold out
£121.72 - £121.72
£121.72
£121.72 - £121.72
£121.72

WP-CNCY/009 - SmartBench Complete Dust Shoe

Trend
Out of stock

Replacement Dust Shoe is compatible with any Trend Yeti CNC SmartBench with Z Head version 2. Complete SmartBench Dust Shoe for effective dust ext...

View full details
£121.72 - £121.72
£121.72
£121.72 - £121.72
£121.72
Sold out
Sold out
£44.65 - £44.65
£44.65
£44.65 - £44.65
£44.65

46/902X1/4TC - Guided profiler 9.5mm dia x 12.7mm cut

Trend
Out of stock

Trend Professional 1/4in shank bearing guided trimming cutter - 9.5mm diameter for laminate and template work 9.5mm diameter X 12.7mm cutting depth...

View full details
£44.65 - £44.65
£44.65
£44.65 - £44.65
£44.65
Sold out
Sold out
£78.25 - £78.25
£78.25
£78.25 - £78.25
£78.25

7E/3X1/4TC - Pin guided round over cutter

Trend
Out of stock

Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters.

£78.25 - £78.25
£78.25
£78.25 - £78.25
£78.25
Sold out
Sold out
£52.96 - £52.96
£52.96
£52.96 - £52.96
£52.96

CSB/21036 - Trend Wood Circular Saw Blade 210mm x 30mm x 36T

Trend
Out of stock

A range of tungsten carbide tipped blades for wood and wood-based materials. For use in circular, plunge and table saws, and available in a range o...

View full details
£52.96 - £52.96
£52.96
£52.96 - £52.96
£52.96
Sold out

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare
×

Trade Prices, Delivered

5% OFF

Join our trade mailing list and get 5% off your first order plus exclusive trade deals.

No thanks, I'll pay full price

You're In!

Check your email for your discount code.
Use code: TRADE5