Trend

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges.

Ideal for following template. It is advisable that the template is at least 5mm thicker than the cut length of the tool.

Replacement fastner set for the Trend STRIKE/JIG. Includes: 4 x M4 x 6mm DIN 85 Machine Screws 10 x M4 x 8mm DIN 85 Machine Screws 2 x M4 Retaining...

High-performance, multi-material abrasives suitable for wood, paint, plastic, filler, plaster and metal. Available in 40, 60, 80, 120, 150, 180 and...

These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bear...

A range of thin kerf tungsten carbide tipped blades for wood and wood-based materials. For use in cordless circular, plunge and table saws, and ava...

These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This type without scribers are for lamina...

Trend 35mm Hinge Sinking Cutter - 8mm shank for melamine faced boards Affordable cutter for drilling 35mm diameter recesses for Euro style kitchen ...

Profiler with shank mounted bearing guides. For use with router mounted above or below a table when following a template. For profiling and rebat...

High-performance, multi-material abrasives suitable for wood, paint, plastic, filler, plaster and metal. Available in 40, 60, 80, 120, 150, 180 and...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

Purpose made for stair housing jigs. Ensures tight fit of tread in string.

Mini strop accessory for use with the Fasttrack sharpener. Retro fit design self-adhesive backed. Strop is placed under the base of the Fasttrack. ...

High performance multi material long life Mesh abrasive for 93mm x 185mm 1/3 Sheet Sanders. Suitable for wood, paint, plaster and metal SILICON CAR...

A range of tungsten carbide tipped saw blades for cutting Plastic, Aluminium, Copper and other non-ferrous metals and alloys. For use in circular, ...

A revolutionary APF20 mask with 99.99% filtration efficiency and a range of innovative features. Provides protection when working with hardwood, MD...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

Trend Professional HSSE 8mm shank straight router cutter - 8mm diameter for aluminium and plastics 8mm diameter X 14mm cut length for specialist ro...

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a rou...

Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to f...

Relaement Wrench 17mm for T18S/R14

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges.

Replacement 240V electrical board T33 extractor only