Skip to content
About Us – Northants Trade Contact Information Advice & Guides
Trade Prices. Maximum Choice.
Trade Prices. Maximum Choice.

Trend

Sold out
£78.25 - £78.25
£78.25
£78.25 - £78.25
£78.25

21/2X1/2TC - Guided housing cutter

Trend
Out of stock

Template thickness should be 5mm thicker than cut length of cutter. Can be used to rout both tenons and housings.

£78.25 - £78.25
£78.25
£78.25 - £78.25
£78.25
Sold out
Trend C271X1/2TC - Sash bar ovolo joint cutter 17mm radius
Trend C271X1/2TC - Sash bar ovolo joint cutter 17mm radius Sold out
£85.03 - £85.03
£85.03
£85.03 - £85.03
£85.03

C271X1/2TC - Sash bar ovolo joint cutter 17mm radius

Trend
Out of stock

Enables curved frames to be moulded.

£85.03 - £85.03
£85.03
£85.03 - £85.03
£85.03
Sold out
Sold out
£102.18 - £102.18
£102.18
£102.18 - £102.18
£102.18

27/35X1/2TC - Variable groover 3mm to 5mm

Trend
Out of stock

To adjust the groove width these tools can be re-assembled with the supplied shims and spacers inserted between the groovers, giving a 0.1mm incre...

View full details
£102.18 - £102.18
£102.18
£102.18 - £102.18
£102.18
Sold out
Trend WP-LOCK/T/324 - Lock template 26.2mm x 134mm faceplate
Trend WP-LOCK/T/324 - Lock template 26.2mm x 134mm faceplate Sold out
£15.36 - £15.36
£15.36
£15.36 - £15.36
£15.36

WP-LOCK/T/324 - Lock template 26.2mm x 134mm faceplate

Trend
Out of stock

Accessory template for the LOCK/JIG.

£15.36 - £15.36
£15.36
£15.36 - £15.36
£15.36
Sold out
Trend C078X1/4TC - Rounding over 9.5mm radius x 15.9mm cut
Trend C078X1/4TC - Rounding over 9.5mm radius x 15.9mm cut
Sold out
£63.78 - £63.78
£63.78
£63.78 - £63.78
£63.78

C078X1/4TC - Rounding over 9.5mm radius x 15.9mm cut

Trend
Out of stock

Trend Craft Pro 1/4in shank bearing guided round over router cutter - 9.5mm radius Two Flute Carbide tips. Two flute carbide TCT tips for cleaner ...

View full details
£63.78 - £63.78
£63.78
£63.78 - £63.78
£63.78
Sold out
Sold out
£15.36 - £15.36
£15.36
£15.36 - £15.36
£15.36

WP-T8/203 - T8 Fine Height Adjuster

Trend
Out of stock

Replacement Router Table Height Adjuster for T8 Router

£15.36 - £15.36
£15.36
£15.36 - £15.36
£15.36
Sold out
Sold out
£91.61 - £91.61
£91.61
£91.61 - £91.61
£91.61

10/10X1/2TC - Chamfer V groove cutter 45 degrees

Trend
Out of stock

Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose.

£91.61 - £91.61
£91.61
£91.61 - £91.61
£91.61
Sold out
Sold out
£46.97 - £46.97
£46.97
£46.97 - £46.97
£46.97

2/15X1/4TC - Single flute cutter 3mm diameter

Trend
Out of stock

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix ...

View full details
£46.97 - £46.97
£46.97
£46.97 - £46.97
£46.97
Sold out
Trend CR/PB25 - Planer blade set 80.5mm x 5.9mm x 1.2mm TC
Trend CR/PB25 - Planer blade set 80.5mm x 5.9mm x 1.2mm TC
Sold out
£16.49 - £16.49
£16.49
£16.49 - £16.49
£16.49

CR/PB25 - Planer blade set 80.5mm x 5.9mm x 1.2mm TC

Trend
Out of stock

Trend solid carbide planer blades are manufactured from high grade carbide and are supplied in pairs. Precision ground with two cutting edges and ...

View full details
£16.49 - £16.49
£16.49
£16.49 - £16.49
£16.49
Sold out
Trend WP-T5/074A - Dust extraction spout T5 v2
Trend WP-T5/074A - Dust extraction spout T5 v2
Sold out
£10.32 - £10.32
£10.32
£10.32 - £10.32
£10.32

WP-T5/074A - Dust extraction spout T5 v2

Trend
Out of stock

Replacement dust extraction spout for the T5 V1 and V2.

£10.32 - £10.32
£10.32
£10.32 - £10.32
£10.32
Sold out
Sold out
£13.98 - £13.98
£13.98
£13.98 - £13.98
£13.98

AB/150/180A - 150mm 180G Random Orbital Sanding Disc, 10 Pack

Trend
Out of stock

High-performance, multi-material abrasives suitable for wood, paint, plastic, filler, plaster and metal. Available in 40, 60, 80, 120, 150, 180 and...

View full details
£13.98 - £13.98
£13.98
£13.98 - £13.98
£13.98
Sold out
Trend WP-PHJ/05 - M6 x 12mm dome socket machine screw
Trend WP-PHJ/05 - M6 x 12mm dome socket machine screw
Sold out
£1.25 - £1.25
£1.25
£1.25 - £1.25
£1.25

WP-PHJ/05 - M6 x 12mm dome socket machine screw

Trend
Out of stock

Machine screw dome M6 x 12mm for pocket hole jig.

£1.25 - £1.25
£1.25
£1.25 - £1.25
£1.25
Sold out
Sold out
£136.28 - £136.28
£136.28
£136.28 - £136.28
£136.28

18/21X1/2TC - Radius panel raiser cutter 14mm radius

Trend
Out of stock

Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed p...

View full details
£136.28 - £136.28
£136.28
£136.28 - £136.28
£136.28
Sold out
Sold out
£193.91 - £193.91
£193.91
£193.91 - £193.91
£193.91

WP-T12EL/029 - Armature 115v for the T12EL

Trend
Out of stock

Replacement Armature 115v for the T12EL

£193.91 - £193.91
£193.91
£193.91 - £193.91
£193.91
Sold out
Sold out
£17.77 - £17.77
£17.77
£17.77 - £17.77
£17.77

2/40LX1/4HSS - Pocket cutter 4.8mm diameter

Trend
Out of stock

These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will...

View full details
£17.77 - £17.77
£17.77
£17.77 - £17.77
£17.77
Sold out
Sold out
£9.61 - £9.61
£9.61
£9.61 - £9.61
£9.61

AB/QTR/120P - 115 x 107mm 120G Pro Mesh Quarter Sheet Sanding Pad, 5 Pack

Trend
Out of stock

Ultra high-performance, multi-material net abrasives that deliver superior extraction performance and a professional surface finish. Suitable for w...

View full details
£9.61 - £9.61
£9.61
£9.61 - £9.61
£9.61
Sold out
Trend C198X1/2TC - Bearing guided round over ovolo 16mm radius
Trend C198X1/2TC - Bearing guided round over ovolo 16mm radius
Sold out
£60.37 - £60.37
£60.37
£60.37 - £60.37
£60.37

C198X1/2TC - Bearing guided round over ovolo 16mm radius

Trend
Out of stock

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a ro...

View full details
£60.37 - £60.37
£60.37
£60.37 - £60.37
£60.37
Sold out
Sold out
£4.72 - £4.72
£4.72
£4.72 - £4.72
£4.72

WP-T18/R14094 - Rubber Pin 5 x 8mm T18S/R14

Trend
Out of stock

Replacement Rubber Pin 5 x 8mm for T18S/R14

£4.72 - £4.72
£4.72
£4.72 - £4.72
£4.72
Sold out
Sold out
£56.98 - £56.98
£56.98
£56.98 - £56.98
£56.98

2/45X1/4TC - Single flute cutter 5mm diameter

Trend
Out of stock

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Small diameter tools...

View full details
£56.98 - £56.98
£56.98
£56.98 - £56.98
£56.98
Sold out
Trend C121DX1/4TC - Template profile 12.7mm diameter
Trend C121DX1/4TC - Template profile 12.7mm diameter
Sold out
£37.52 - £37.52
£37.52
£37.52 - £37.52
£37.52

C121DX1/4TC - Template profile 12.7mm diameter

Trend
Out of stock

Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid cu...

View full details
£37.52 - £37.52
£37.52
£37.52 - £37.52
£37.52
Sold out
Sold out
£125.41 - £125.41
£125.41
£125.41 - £125.41
£125.41

2214/1WS - Plug maker match 1 inch diameter

Trend
Out of stock

Precision made plug makers for use on natural timber, exactly matching the holes produced by the Saw Tooth Forstners groups 1306 & 1307. These ...

View full details
£125.41 - £125.41
£125.41
£125.41 - £125.41
£125.41
Sold out
Sold out
£10.25 - £10.25
£10.25
£10.25 - £10.25
£10.25

WP-T8/056 - Phenolic Base Plate for T8 Router

Trend
Out of stock

Replacement Phenolic Base Plate for T8 Router

£10.25 - £10.25
£10.25
£10.25 - £10.25
£10.25
Sold out
Trend WP-T5/003A - Base complete v2
Trend WP-T5/003A - Base complete v2
Sold out
£101.51 - £101.51
£101.51
£101.51 - £101.51
£101.51

WP-T5/003A - Base complete v2

Trend
Out of stock

Replacement base for the T5 V2

£101.51 - £101.51
£101.51
£101.51 - £101.51
£101.51
Sold out
Sold out
£13.32 - £13.32
£13.32
£13.32 - £13.32
£13.32

WP-T8/048 - T8 Router Left Handle

Trend
Out of stock

Replacement Left Handle for T8 Router

£13.32 - £13.32
£13.32
£13.32 - £13.32
£13.32
Sold out

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare