Skip to content
About Us – Northants Trade Contact Information Advice & Guides
Trade Prices. Maximum Choice.
Trade Prices. Maximum Choice.

Trend

Sold out
£58.48 - £58.48
£58.48
£58.48 - £58.48
£58.48

31/50X1/2TC - Dovetail cutter 104 degrees x 19.1mm diameter

Trend
Out of stock

For dovetail joints and sliding dovetails. Can be used with Ref.10/40 butterfly 14 degree spline cutter.

£58.48 - £58.48
£58.48
£58.48 - £58.48
£58.48
Sold out
Sold out
£196.28 - £196.28
£196.28
£196.28 - £196.28
£196.28

CR/PDS1X1/2TC - Panel door set ogee

Trend
Out of stock

A panel door set consisting of a Easyset profile scriber and panel raiser cutter. Supplied in a storage case.

£196.28 - £196.28
£196.28
£196.28 - £196.28
£196.28
Sold out
Sold out
£24.76 - £24.76
£24.76
£24.76 - £24.76
£24.76

STEALTH/2 - Air Stealth respirator mask storage case-hard shell zip up case to store Stealth half masks safely when not in use.

Trend
Out of stock

Ensures AIR STEALTH dust mask does not get contaminated when not in use. Hard case with zip closure. Removable fully adjustable shoulder strap. Han...

View full details
£24.76 - £24.76
£24.76
£24.76 - £24.76
£24.76
Sold out
Sold out
£108.42 - £108.42
£108.42
£108.42 - £108.42
£108.42

46/82X1/2TC - Trimming cutter 12.7mm diameter

Trend
Out of stock

Self-guiding triple flute cutter. Extra fine trimming and longer life. For trimming of laminate or plywood overlay etc. Has twin bearings for...

View full details
£108.42 - £108.42
£108.42
£108.42 - £108.42
£108.42
Sold out
Sold out
£4.54 - £4.54
£4.54
£4.54 - £4.54
£4.54

WP-WRT/47 - Foot WRT

Trend
Out of stock

Replacement foot for WRT.

£4.54 - £4.54
£4.54
£4.54 - £4.54
£4.54
Sold out
Sold out
£15.36 - £15.36
£15.36
£15.36 - £15.36
£15.36

WP-LOCK/T/317 - Lock template 14mm x 132mm faceplate

Trend
Out of stock

Accessory template for the LOCK/JIG.

£15.36 - £15.36
£15.36
£15.36 - £15.36
£15.36
Sold out
Sold out
£123.94 - £123.94
£123.94
£123.94 - £123.94
£123.94

46/39X1/2TC - Bearing Guided 35mm Diameter Rebater

Trend
Out of stock

Popular rebate sets which include different size bearings for a choice of rebates. Ease of setting-up and accurate depth of cut. Ideal for rebating...

View full details
£123.94 - £123.94
£123.94
£123.94 - £123.94
£123.94
Sold out
Sold out
£4.45 - £4.45
£4.45
£4.45 - £4.45
£4.45

WP-T18/R14038 - Compression Spring T18S/R14

Trend
Out of stock

Replacement Compression Spring for T18S/R14.

£4.45 - £4.45
£4.45
£4.45 - £4.45
£4.45
Sold out
Sold out
£19.69 - £19.69
£19.69
£19.69 - £19.69
£19.69

WP-VJS/07 - Varijig Extrusion 700mm Black

Trend
Out of stock

Replacement extrusion for the Vari jig.

£19.69 - £19.69
£19.69
£19.69 - £19.69
£19.69
Sold out
Sold out
£114.49 - £114.49
£114.49
£114.49 - £114.49
£114.49

CSB/PT25080 - Trend Laminate/HPL Circular Saw Blade 250mm x 30mm x 80T

Trend
Out of stock

A range of tungsten carbide tipped saw blades for cutting laminated and resin-based materials. For use in circular, plunge and table saws, Trend La...

View full details
£114.49 - £114.49
£114.49
£114.49 - £114.49
£114.49
Sold out
Sold out
£11.96 - £11.96
£11.96
£11.96 - £11.96
£11.96

SNAP/SQ/2B - Trend Snappy square No 2 bit 150mm OL

Trend
Out of stock

Trend Snappy Robertson No2 Driver Bit - 150mm long 150mm long bit ideal for use with Trend Pocket Hole screws and Pocket hole Jigs Allows screws to...

View full details
£11.96 - £11.96
£11.96
£11.96 - £11.96
£11.96
Sold out
Sold out
£3.94 - £3.94
£3.94
£3.94 - £3.94
£3.94

WP-HJ/C/11 - End cap foot plastic H/JIG/C

Trend
Out of stock

Replacement end cap for H/JIG/C.

£3.94 - £3.94
£3.94
£3.94 - £3.94
£3.94
Sold out
Sold out
£90.55 - £90.55
£90.55
£90.55 - £90.55
£90.55

CSB/31548 - Trend Wood Circular Saw Blade 315mm x 30mm x 48T

Trend
Out of stock

A range of tungsten carbide tipped blades for wood and wood-based materials. For use in circular, plunge and table saws, and available in a range o...

View full details
£90.55 - £90.55
£90.55
£90.55 - £90.55
£90.55
Sold out
Sold out
£36.62 - £36.62
£36.62
£36.62 - £36.62
£36.62

CSB/13616TA - Trend Wood Cordless Circular Saw Blade 136mm x 20mm x 16T

Trend
Out of stock

A range of thin kerf tungsten carbide tipped blades for wood and wood-based materials. For use in cordless circular, plunge and table saws, and ava...

View full details
£36.62 - £36.62
£36.62
£36.62 - £36.62
£36.62
Sold out
Sold out
£41.42 - £41.42
£41.42
£41.42 - £41.42
£41.42

C164X1/2TC - Two flute cutter 12.7mm diameter

Trend
Out of stock

Trend Craft Pro 1/2in shank worktop joint cutter - 12.7mm diameter Two Flute Carbide tips. 12.7mm diameter X 63mm cutting depth; the essential cutt...

View full details
£41.42 - £41.42
£41.42
£41.42 - £41.42
£41.42
Sold out
Sold out
£17.77 - £17.77
£17.77
£17.77 - £17.77
£17.77

2/40LX1/4HSS - Pocket cutter 4.8mm diameter

Trend
Out of stock

These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will...

View full details
£17.77 - £17.77
£17.77
£17.77 - £17.77
£17.77
Sold out
Sold out
£61.63 - £61.63
£61.63
£61.63 - £61.63
£61.63

31/25X1/2TC - Dovetail cutter 104 degrees x 25.4mm diameter

Trend
Out of stock

For dovetail joints and sliding dovetails. Can be used with Ref.10/40 butterfly 14 degree spline cutter.

£61.63 - £61.63
£61.63
£61.63 - £61.63
£61.63
Sold out
Sold out
£17.35 - £17.35
£17.35
£17.35 - £17.35
£17.35

SNAP/TH/1 - Trend Snappy tool holder - 30 piece

Trend
Out of stock

Heavy duty fabric tool holder. With elastic pockets to hold Trend Snappy shanks. Supplied with a Trend Snappy pencil. Tool holders have a belt st...

View full details
£17.35 - £17.35
£17.35
£17.35 - £17.35
£17.35
Sold out
Sold out
£35.72 - £35.72
£35.72
£35.72 - £35.72
£35.72

3/01X1/4TC - Two Flute Cutter 4mm diameter

Trend
Out of stock

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Suitable...

View full details
£35.72 - £35.72
£35.72
£35.72 - £35.72
£35.72
Sold out
Sold out
£14.40 - £14.40
£14.40
£14.40 - £14.40
£14.40

WP-CNCY/068 - Replacement Drag Chain Latch (Right) for the SmartBench

Trend
Out of stock

Drag Chain Latch for power side (Right when looking from behind of Z Head) for the Trend Yeti CNC SmartBenchCompatible with all Smartbench variants.

£14.40 - £14.40
£14.40
£14.40 - £14.40
£14.40
Sold out
Sold out
£4.06 - £4.06
£4.06
£4.06 - £4.06
£4.06

WP-T7/022 - Speed Knob T7

Trend
Out of stock

Replacement Speed Knob for the T7 router.

£4.06 - £4.06
£4.06
£4.06 - £4.06
£4.06
Sold out
Sold out
£6.42 - £6.42
£6.42
£6.42 - £6.42
£6.42

WP-CRT/21 - Push block CRT

Trend
Out of stock

Replacement push block for the CRT.

£6.42 - £6.42
£6.42
£6.42 - £6.42
£6.42
Sold out
Sold out
£9.61 - £9.61
£9.61
£9.61 - £9.61
£9.61

AB/QTR/120P - 115 x 107mm 120G Pro Mesh Quarter Sheet Sanding Pad, 5 Pack

Trend
Out of stock

Ultra high-performance, multi-material net abrasives that deliver superior extraction performance and a professional surface finish. Suitable for w...

View full details
£9.61 - £9.61
£9.61
£9.61 - £9.61
£9.61
Sold out
Sold out
£17.04 - £17.04
£17.04
£17.04 - £17.04
£17.04

WP-LOCK/T/LUP - LOCK/JIG line up template

Trend
Out of stock

Line up template for LOCK/JIG.Allows jig to be positioned more centrally on door.

£17.04 - £17.04
£17.04
£17.04 - £17.04
£17.04
Sold out

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare
×

Trade Prices, Delivered

5% OFF

Join our trade mailing list and get 5% off your first order plus exclusive trade deals.

No thanks, I'll pay full price

You're In!

Check your email for your discount code.
Use code: TRADE5