Trend

Lip and spur dowel drills for use with the Trend Craft Dovetail Jig dowelling template. For drilling machines or routers.

Lip and spur dowel drills for use with the Trend Craft Dovetail Jig dowelling template. For drilling machines or routers.

Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural t...

Three piece cutter pack with three connecting bolts and ten biscuits aimed at kitchen fitters. Pack includes one 1/2 inch diameter x 50mm cut lengt...

Three piece cutter pack with three connecting bolts and ten biscuits aimed at kitchen fitters. Pack includes one 1/2 inch diameter x 50mm cut lengt...

Made from reinforced plastic with lift and lock ratchet system, with a steel studding.

Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin buil...

3 degree undercut router bit with shank mounted bearing guide for routing a leading edge on doors to allow a tight fit against jamb.

Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees.

Trend Craft Pro 1/2in shank Intumescent strip cutter - 10mm width Two Flute Carbide tips. Cuts the perfect sized slot into door edges and door fram...

Trend Craft Pro 1/2in shank Aquamac cutter - 46.3mm diameter Two Flute Carbide tips. Speeds up the fitting of specialist weather seals Schlegel Aqu...

Recessing cutter will accommodate the Schlegel Aquamac 63 or Exitex Aquatex P6 weather strip system and allows for a particularly small gap between...

Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin buil...

Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin buil...

These cutters are self-guiding and can be used to produce rebates, lap joints, tongues and rebated corners. When using bearing Ref. B95A make two p...

TCT cutter with staggered cutting surfaces. Deep mortising and grooving giving good chip clearance. For lock mortising, two width cuts will be nee...

Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin buil...

2 degree undercut router bits for routing a leading edge on doors to allow a tight fit against jamb. Shank mounted bearing self guides the cutter a...

Ideal for speaker cabinets and drawer construction. Please note. This tool cannot be re-sharpened. Inverted use only. Use on MDF and natural ti...

Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural t...

These cutters are self-guiding and can be used to produce rebates, lap joints, tongues and rebated corners. When using bearing Ref. B95A make two p...

Popular rebate sets which include different size bearings for a choice of rebates. Ease of setting-up and accurate depth of cut. Ideal for rebating...

Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin buil...

Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural t...