Trend eBay

Trend Bearing Guided Template Profile Cutter for rebating and trimming edges. Extra care must be taken to avoid breakage of the cutter. Two flute c...

The Trend CraftPro Chamfer V-Groove Cutter has two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and t...

Holds door while drilling and fitting locks. No set-up time needed. No more searching and alternative door stops. Padded to prevent door and floor ...

The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based mate...

The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based mate...

Trend 225mm Mesh Random Orbital Sanding Disc with silicon carbide grit for long-life, 5x longer than conventional abrasives and enhanced performanc...

The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based mate...

Trend Self-Guided 90° Bearing Guided Trimmer for trimming plastic or plywood overlays. Also for copy profiling with a template. Raise cutter in sta...

The Trend AirPro Max THP3 Filter provides respiratory protection to BS EN 12941:1999. Covers all types of dust generated when working in hard and s...

The Trend CraftPro Bearing Guided 3° Undercut Router Bit has a shank-mounted bearing guide for routing a leading edge on doors to allow a tight fit...

The Trend Corner Chisel is used to square up rounded corners on hinge and lock recesses. Fitted with a high-speed steel (HSS) anvil. Use with a Ham...

The Trend C153/3 CraftPro Kitchen Worktop Cutter is suitable for a wide range of applications such as engraving, grooving, rebating and shallow mor...

The Trend C168 x 1/4TC Guided Trimmer has two flute carbide TCT tips. Used for trimming plastic or plywood overlays. Its 6.3mm diameter allows it t...

This TCT two wing slotting cutter is ideal for biscuit jointing sizes The set is supplied with 3 ball bearing guides to suit the three sizes of bi...

The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based mate...

The Trend DAF/8 Digital Angle Finder has a large LCD display with digital readout to allow easy reading of angles. It calculates angles from 0-220°...

The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based mate...

This Trend Digital Angle Rule calculates angles quickly and accurately and is ideal for woodworking, construction and machining. The rule is made f...

Trend Self-Guided 90° Bearing Guided Trimmer for trimming plastic or plywood overlays. Also for copy profiling with a template. Raise cutter in sta...

Trend TCT Radius Cove Cutter with two flutes and carbide TCT tips for a cleaner cut and fast clearance of waste in all timber and timber-based mate...

Trend collet reduction sleeve, used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the correc...

This Trend foot operated Tredlifta Lifter A is used to support the door while fitting into the door frame, it is foot operated freeing up the users...

The Trend CraftPro Bearing Guided Ovolo Round Over Cutter for edge detailing on curved and straight work with additional bearing for quirked Ovolo ...

Trend CraftPro Intumescent Strip Cutter cuts the perfect sized slot into door edges and door frames for fast, perfectly flush fitting of intumescen...