Skip to content
About Us – Northants Trade Contact Information Advice & Guides
Trade Prices. Maximum Choice.
Trade Prices. Maximum Choice.

Trend eBay

Sold out
£72.70 - £72.70
£72.70
£72.70 - £72.70
£72.70

3/75X1/2TC - Two flute 12mm dia x 63mm cut

Trend
Out of stock

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

View full details
£72.70 - £72.70
£72.70
£72.70 - £72.70
£72.70
Sold out
Sold out
£38.59 - £38.59
£38.59
£38.59 - £38.59
£38.59

WP-T32/046 - T32 and T33 high efficiency carpet attachment

Trend
Out of stock

High efficiency carpet attachment for T32 & T33 extractors

£38.59 - £38.59
£38.59
£38.59 - £38.59
£38.59
Sold out
Sold out
£43.60 - £43.60
£43.60
£43.60 - £43.60
£43.60

3/80X1/4TC - Two flute cutter 12.7mm diameter

Trend
Out of stock

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

View full details
£43.60 - £43.60
£43.60
£43.60 - £43.60
£43.60
Sold out
Sold out
£30.38 - £30.38
£30.38
£30.38 - £30.38
£30.38

SNAP/CB/3TC - Trend Snappy TC Counterbore 4.75mm x 12.7mm

Trend
Out of stock

Trend Snappy 4.75mm x 12.7mm TCT Counterbore - to recess screws for plugging 12/7mm diameter TCT counterbore to drill precision recess to hide scre...

View full details
£30.38 - £30.38
£30.38
£30.38 - £30.38
£30.38
Sold out
Sold out
£64.07 - £64.07
£64.07
£64.07 - £64.07
£64.07

WP-T32/006 - Motor for T32

Trend
Out of stock

Replacement motor for the T32 extractor

£64.07 - £64.07
£64.07
£64.07 - £64.07
£64.07
Sold out
Sold out
£27.73 - £27.73
£27.73
£27.73 - £27.73
£27.73

C301X1/4TC - Trend CraftPro 1/4 Single Flute ABS/PVC 6.3mm dia x 25mm cut depth

Trend
Out of stock

Used to slot and trim low melting point plastics such as ABS, Styrene and PVC. For maximum life these cutters are Solid Carbide. Single flute f...

View full details
£27.73 - £27.73
£27.73
£27.73 - £27.73
£27.73
Sold out
Sold out
£42.53 - £42.53
£42.53
£42.53 - £42.53
£42.53

6200/4TC - Adjustable countersink 1/2 inch diameter

Trend
Out of stock

They are designed to drill and coutersink simultaneously, a wide variety of materials. Supplied with a HSS slow spiral drill bit. Fully adjusta...

View full details
£42.53 - £42.53
£42.53
£42.53 - £42.53
£42.53
Sold out
Sold out
£51.47 - £51.47
£51.47
£51.47 - £51.47
£51.47

50/10X1/4HSSE - Helical plunge cutter 10mm diameter

Trend
Out of stock

Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine ...

View full details
£51.47 - £51.47
£51.47
£51.47 - £51.47
£51.47
Sold out
Sold out
£40.22 - £40.22
£40.22
£40.22 - £40.22
£40.22

WP-MT/23/EURO - Guide bush set plastic metric 5 Off

Trend
Out of stock

Replacement guide bush set for the MT/JIG.

£40.22 - £40.22
£40.22
£40.22 - £40.22
£40.22
Sold out
Sold out
£152.15 - £152.15
£152.15
£152.15 - £152.15
£152.15

WP-T10E/103 - Speed Control Circuit Board 240V

Trend
Out of stock

Speed control circuit board for the T10 router.

£152.15 - £152.15
£152.15
£152.15 - £152.15
£152.15
Sold out
Sold out
£55.25 - £55.25
£55.25
£55.25 - £55.25
£55.25

C231X1/2TC - 19mm Rebater

Trend
Out of stock

Recessing cutter for producing double rebates. For producing recesses with a lower rebate. Designed to accept library/bookcase strip. Specifically...

View full details
£55.25 - £55.25
£55.25
£55.25 - £55.25
£55.25
Sold out
Sold out
£127.33 - £127.33
£127.33
£127.33 - £127.33
£127.33

34/14TC - Slotter 11mm kerf M12mm bore

Trend
Out of stock

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut.

£127.33 - £127.33
£127.33
£127.33 - £127.33
£127.33
Sold out
Sold out
£136.28 - £136.28
£136.28
£136.28 - £136.28
£136.28

90/12X1/2TC - Traditional torus cutter

Trend
Out of stock

Classic skirting board mould.

£136.28 - £136.28
£136.28
£136.28 - £136.28
£136.28
Sold out
Sold out
£31.20 - £31.20
£31.20
£31.20 - £31.20
£31.20

C121KX1/4TC - Template profile 12.7mm diameter

Trend
Out of stock

Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid cu...

View full details
£31.20 - £31.20
£31.20
£31.20 - £31.20
£31.20
Sold out
Sold out
£75.94 - £75.94
£75.94
£75.94 - £75.94
£75.94

46/3X1/4TC - Bevel trimmer 20mm diameter 14mm length

Trend
Out of stock

Cut a wider edge line, at an angle of 80 degrees. A 16mm bearing is supplied as standard. A larger 19mm bearing will spread the wear of the cutti...

View full details
£75.94 - £75.94
£75.94
£75.94 - £75.94
£75.94
Sold out
Sold out
£89.28 - £89.28
£89.28
£89.28 - £89.28
£89.28

C150X1/4TC - Raised panel 12mm radius x 41mm diameter

Trend
Out of stock

Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural t...

View full details
£89.28 - £89.28
£89.28
£89.28 - £89.28
£89.28
Sold out
Sold out
£68.41 - £68.41
£68.41
£68.41 - £68.41
£68.41

AB/125/240M/B - Mesh Random Orbital Sanding Disc 50pc 125mm 240 grit

Trend
Out of stock

High performance multi material long life Mesh abrasive for 125mm Random Orbit sanders Suitable for wood, paint, plaster and metal SILICON CARBIDE ...

View full details
£68.41 - £68.41
£68.41
£68.41 - £68.41
£68.41
Sold out
Sold out
£82.70 - £82.70
£82.70
£82.70 - £82.70
£82.70

46/11X1/2TC - Bearing guided ovolo cutter 3.2mm radius

Trend
Out of stock

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a rou...

View full details
£82.70 - £82.70
£82.70
£82.70 - £82.70
£82.70
Sold out
Sold out
£24.66 - £24.66
£24.66
£24.66 - £24.66
£24.66

C018X1/4TC - Two Flute Cutter 11.1mm diameter

Trend
Out of stock

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood ...

View full details
£24.66 - £24.66
£24.66
£24.66 - £24.66
£24.66
Sold out
Sold out
£21.79 - £21.79
£21.79
£21.79 - £21.79
£21.79

AIR/PM/2 - Air Pro Max Pre Filter Pack of 10

Trend
Out of stock

Pack of 10 Pre-filters for the Air Pro Max respirator.

£21.79 - £21.79
£21.79
£21.79 - £21.79
£21.79
Sold out
Sold out
£122.12 - £122.12
£122.12
£122.12 - £122.12
£122.12

46/361X1/2TC - Guided chamfer cutter 45 degrees

Trend
Out of stock

Ideal for newel posts and caps for stairs. Supplied with one nylon bearing allowing use with solid surface material.

£122.12 - £122.12
£122.12
£122.12 - £122.12
£122.12
Sold out
Sold out
£147.32 - £147.32
£147.32
£147.32 - £147.32
£147.32

46/57X1/2TC - Guided staff bead cutter

Trend
Out of stock

Ideal for producing nosings and attractive edges.

£147.32 - £147.32
£147.32
£147.32 - £147.32
£147.32
Sold out
Sold out
£33.60 - £33.60
£33.60
£33.60 - £33.60
£33.60

WP-T32/045 - 3 metre hose for the T32

Trend
Out of stock

Replacement 3 metre hose for T32 extractor

£33.60 - £33.60
£33.60
£33.60 - £33.60
£33.60
Sold out
Sold out
£131.81 - £131.81
£131.81
£131.81 - £131.81
£131.81

46/104X1/2TC - Bevel cutter

Trend
Out of stock

Useful for bevelling thick timbers. Certain sizes can be used for jointing, boxes, pilasters and carcassing. For full bevels, template should ...

View full details
£131.81 - £131.81
£131.81
£131.81 - £131.81
£131.81
Sold out

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare
×

Trade Prices, Delivered

5% OFF

Join our trade mailing list and get 5% off your first order plus exclusive trade deals.

No thanks, I'll pay full price

You're In!

Check your email for your discount code.
Use code: TRADE5