Skip to content
About Us – Northants Trade Contact Information Advice & Guides
Trade Prices. Maximum Choice.
Trade Prices. Maximum Choice.

Trend eBay

Sold out
£127.74 - £127.74
£127.74
£127.74 - £127.74
£127.74

C063CX1/2TC - Self guided radius 25.4mm

Trend
Out of stock

Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with.The guide bearing follows the vertical edge or template.

£127.74 - £127.74
£127.74
£127.74 - £127.74
£127.74
Sold out
Sold out
£65.92 - £65.92
£65.92
£65.92 - £65.92
£65.92

4/25X1/4TC - Two flute cutter 17mm diameter

Trend
Out of stock

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

View full details
£65.92 - £65.92
£65.92
£65.92 - £65.92
£65.92
Sold out
Sold out
£15.11 - £15.11
£15.11
£15.11 - £15.11
£15.11

WP-MT/02/EURO - MT/JIG set-up bar

Trend
Out of stock

Set-up bar for the MT/JIG/EURO with metric measurements.

£15.11 - £15.11
£15.11
£15.11 - £15.11
£15.11
Sold out
Sold out
£29.75 - £29.75
£29.75
£29.75 - £29.75
£29.75

C007LX1/4TC - Pocket cutter 6.3mm diameter

Trend
Out of stock

A two flute cutters with extra long shanks. Deep grooving, rebating and mortising. Useful for template work when thickness of template restricts...

View full details
£29.75 - £29.75
£29.75
£29.75 - £29.75
£29.75
Sold out
Sold out
£514.99 - £514.99
£514.99
£514.99 - £514.99
£514.99

AIR/PRO/D6/E - Airshield Pro bundle with filters and ear defenders

Trend
Out of stock

Airshield Pro bundle with filters and ear defenders Battery powered respirator for use with all woodworking applications Assigned Protection Factor...

View full details
£514.99 - £514.99
£514.99
£514.99 - £514.99
£514.99
Sold out
Sold out
£61.63 - £61.63
£61.63
£61.63 - £61.63
£61.63

3/83DX1/2TC - Two flute cutter 12.7mm diameter

Trend
Out of stock

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

View full details
£61.63 - £61.63
£61.63
£61.63 - £61.63
£61.63
Sold out
Sold out
£31.27 - £31.27
£31.27
£31.27 - £31.27
£31.27

C176X1/4TC - Dowel drill 8mm x 35mm cut

Trend
Out of stock

Lip and spur dowel drills for use with the Trend Craft Dovetail Jig dowelling template. Can be used for 8mm dowels. For drilling machines or rout...

View full details
£31.27 - £31.27
£31.27
£31.27 - £31.27
£31.27
Sold out
Sold out
£29.14 - £29.14
£29.14
£29.14 - £29.14
£29.14

C154X1/4TC - Dovetail 6.0mm diameter x 98 degrees two flute

Trend
Out of stock

These dovetail cutters produce a tight reliable joint for drawers, boxes etc. Refs. C154 & C041A can be used with Trend CDJ300, CDJ600 & ...

View full details
£29.14 - £29.14
£29.14
£29.14 - £29.14
£29.14
Sold out
Sold out
£27.98 - £27.98
£27.98
£27.98 - £27.98
£27.98

AB/150/M7/P - 150mm 80G/120G/180G Pro Mesh Sanding Discs with Pad Saver, 7 Pack

Trend
Out of stock

Ultra high-performance, multi-material net abrasives that deliver superior extraction performance and a professional surface finish. Suitable for w...

View full details
£27.98 - £27.98
£27.98
£27.98 - £27.98
£27.98
Sold out
Sold out
£235.74 - £235.74
£235.74
£235.74 - £235.74
£235.74

T33A - 1200W Wet & Dry M-Class Dust Extractor 240V UK & Ireland only

Trend
Out of stock

Trade-rated wet & dry M-Class dust extractor with power take-off for workshop, site and trade use. Ideal for power tool applications, dealing w...

View full details
£235.74 - £235.74
£235.74
£235.74 - £235.74
£235.74
Sold out
Sold out
£63.06 - £63.06
£63.06
£63.06 - £63.06
£63.06

AIR/P/5/EURO - Charger 220V Euro plug AIR/PRO - Authorised distributors only

Trend
Out of stock

Battery charger for the AIRSHIELD PRO. Not for UK sale. For Euro socket only. Contact authorised distributor in your country for availability.

£63.06 - £63.06
£63.06
£63.06 - £63.06
£63.06
Sold out
Sold out
£72.40 - £72.40
£72.40
£72.40 - £72.40
£72.40

WP-T12EL/039 - Field coil 115V (T12EL)

Trend
Out of stock

Replacement Field coil 115V (T12EL

£72.40 - £72.40
£72.40
£72.40 - £72.40
£72.40
Sold out
Sold out
£50.38 - £50.38
£50.38
£50.38 - £50.38
£50.38

11/3X1/2TC - Chamfer V groove cutter 45 degrees

Trend
Out of stock

Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Is ideal for imitating 'V' jo...

View full details
£50.38 - £50.38
£50.38
£50.38 - £50.38
£50.38
Sold out
Sold out
£41.42 - £41.42
£41.42
£41.42 - £41.42
£41.42

3/06X8MMTC - Two Flute Cutter 2mm Diameter

Trend
Out of stock

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Suitable fo...

View full details
£41.42 - £41.42
£41.42
£41.42 - £41.42
£41.42
Sold out
Sold out
£31.62 - £31.62
£31.62
£31.62 - £31.62
£31.62

SNAP/CS/5MMTC - Trend Snappy Countersink 5mm x 12.7mm TCT

Trend
Out of stock

Trend Snappy 12.7mm diameter TCT countersink - with adjustable drill 12.7mm diameter countersink with clearance drill designed for Metric screws u...

View full details
£31.62 - £31.62
£31.62
£31.62 - £31.62
£31.62
Sold out
Sold out
£26.77 - £26.77
£26.77
£26.77 - £26.77
£26.77

C168X8MMTC - Guided trimmer 6.35mm diameter x 25.4mm

Trend
Out of stock

Used for trimming plastic or plywood overlays.Also for copy profiling with a template.

£26.77 - £26.77
£26.77
£26.77 - £26.77
£26.77
Sold out
Sold out
£73.76 - £73.76
£73.76
£73.76 - £73.76
£73.76

12/7X1/2TC - Radius cutter 7mm radius

Trend
Out of stock

For coves and part of a rule joint.

£73.76 - £73.76
£73.76
£73.76 - £73.76
£73.76
Sold out
Sold out
£38.15 - £38.15
£38.15
£38.15 - £38.15
£38.15

C164AX1/4TC - Trend CraftPro 1/4in Two Flute Straight Router Cutter Bit 13 dia x 20mm cut depth

Trend
Out of stock

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood ...

View full details
£38.15 - £38.15
£38.15
£38.15 - £38.15
£38.15
Sold out
Sold out
£55.87 - £55.87
£55.87
£55.87 - £55.87
£55.87

WP-CNCY/070 - Replacement E Stop Button for the SmartBench

Trend
Out of stock

Replacement E Stop Button for the Trend Yeti CNC SmartBenchCompatible with all Smartbench variants.

£55.87 - £55.87
£55.87
£55.87 - £55.87
£55.87
Sold out
Sold out
£45.91 - £45.91
£45.91
£45.91 - £45.91
£45.91

C056X1/4TC - Radius 9.5mm radius x 19.1mm diameter

Trend
Out of stock

These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of...

View full details
£45.91 - £45.91
£45.91
£45.91 - £45.91
£45.91
Sold out
Sold out
£75.94 - £75.94
£75.94
£75.94 - £75.94
£75.94

34/8TC - Slotter 7mm kerf 1/4 bore

Trend
Out of stock

All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.

£75.94 - £75.94
£75.94
£75.94 - £75.94
£75.94
Sold out
Sold out
£107.15 - £107.15
£107.15
£107.15 - £107.15
£107.15

7/5X1/2TC - Ovolo round over cutter 10mm radius

Trend
Out of stock

Some Ovolo cutters can be used with radius cutters, to make rule joints.

£107.15 - £107.15
£107.15
£107.15 - £107.15
£107.15
Sold out
Sold out
£15.36 - £15.36
£15.36
£15.36 - £15.36
£15.36

WP-LOCK/T/179 - Lock Template 22mm x 67mm faceplate

Trend
Out of stock

Accessory template for the LOCK/JIG.

£15.36 - £15.36
£15.36
£15.36 - £15.36
£15.36
Sold out
Sold out
£64.37 - £64.37
£64.37
£64.37 - £64.37
£64.37

WP-T10/102 - Side fence body only T10

Trend
Out of stock

Side fence body only T10 .

£64.37 - £64.37
£64.37
£64.37 - £64.37
£64.37
Sold out

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare
×

Trade Prices, Delivered

5% OFF

Join our trade mailing list and get 5% off your first order plus exclusive trade deals.

No thanks, I'll pay full price

You're In!

Check your email for your discount code.
Use code: TRADE5