Skip to content
About Us – Northants Trade Contact Information Advice & Guides
Trade Prices. Maximum Choice.
Trade Prices. Maximum Choice.

Trend eBay

Trend 46/12X1/2TC - Bearing guided ovolo cutter 4.8mm radius
Trend 46/12X1/2TC - Bearing guided ovolo cutter 4.8mm radius Sold out
£83.72 - £83.72
£83.72
£83.72 - £83.72
£83.72

46/12X1/2TC - Bearing guided ovolo cutter 4.8mm radius

Trend
Out of stock

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a rou...

View full details
£83.72 - £83.72
£83.72
£83.72 - £83.72
£83.72
Sold out
Trend 33/60X8MM - Arbor 33/60 for 1/4 bore tools
Trend 33/60X8MM - Arbor 33/60 for 1/4 bore tools Sold out
£27.44 - £27.44
£27.44
£27.44 - £27.44
£27.44

33/60X8MM - Arbor 33/60 for 1/4 bore tools

Trend
Out of stock

Standard duty arbor with 1/4 inch spindle and spacers. Enables mounting of 1/4 inch bore slotters with and without bearings in a variety of posit...

View full details
£27.44 - £27.44
£27.44
£27.44 - £27.44
£27.44
Sold out
Sold out
£15.20 - £15.20
£15.20
£15.20 - £15.20
£15.20

AB/PAD/CRS - 150 x 230mm Coarse Flexible Finishing Pads, 3 Pack

Trend
Out of stock

High-performance, versatile, abrasive finishing pads. Ideal for paint removal, surface preparation, cleaning, polishing, waxing & finishing acr...

View full details
£15.20 - £15.20
£15.20
£15.20 - £15.20
£15.20
Sold out
Trend 3/08X1/2TC - Two flute cutter 12.7mm diameter
Trend 3/08X1/2TC - Two flute cutter 12.7mm diameter Sold out
£44.65 - £44.65
£44.65
£44.65 - £44.65
£44.65

3/08X1/2TC - Two flute cutter 12.7mm diameter

Trend
Out of stock

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

View full details
£44.65 - £44.65
£44.65
£44.65 - £44.65
£44.65
Sold out
Sold out
£136.28 - £136.28
£136.28
£136.28 - £136.28
£136.28

18/20X1/2TC - Panel bevel cutter

Trend
Out of stock

This Raised Panel cutter runs best at lower speeds between 12,000 and 18,000 RPM. Matches our range of profile scribers. Suitable for use on natu...

View full details
£136.28 - £136.28
£136.28
£136.28 - £136.28
£136.28
Sold out
Trend 3/08X1/4TC - Two flute cutter 12.7mm diameter
Trend 3/08X1/4TC - Two flute cutter 12.7mm diameter
Sold out
£44.65 - £44.65
£44.65
£44.65 - £44.65
£44.65

3/08X1/4TC - Two flute cutter 12.7mm diameter

Trend
Out of stock

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

View full details
£44.65 - £44.65
£44.65
£44.65 - £44.65
£44.65
Sold out
Sold out
£153.31 - £153.31
£153.31
£153.31 - £153.31
£153.31

18/81X1/2TC - Bearing guided panel cutter

Trend
Out of stock

Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed p...

View full details
£153.31 - £153.31
£153.31
£153.31 - £153.31
£153.31
Sold out
Trend C021X1/4TC - Two Flute Cutter 12.7mm diameter
Trend C021X1/4TC - Two Flute Cutter 12.7mm diameter
Sold out
£26.77 - £26.77
£26.77
£26.77 - £26.77
£26.77

C021X1/4TC - Two Flute Cutter 12.7mm diameter

Trend
Out of stock

Trend Craft Pro 1/4in shank straight router cutter - 12.7mm diameter Two Flute Carbide tips Two flute carbide TCT tips for cleaner cutting edges a...

View full details
£26.77 - £26.77
£26.77
£26.77 - £26.77
£26.77
Sold out
Trend C079AX1/2TC - Rounding over 19mm radius x 25mm cut
Trend C079AX1/2TC - Rounding over 19mm radius x 25mm cut
Sold out
£85.03 - £85.03
£85.03
£85.03 - £85.03
£85.03

C079AX1/2TC - Rounding over 19mm radius x 25mm cut

Trend
Out of stock

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a ro...

View full details
£85.03 - £85.03
£85.03
£85.03 - £85.03
£85.03
Sold out
Trend C010AX1/4TC - Two Flute Cutter 7.5mm diameter
Trend C010AX1/4TC - Two Flute Cutter 7.5mm diameter
Sold out
£26.22 - £26.22
£26.22
£26.22 - £26.22
£26.22

C010AX1/4TC - Two Flute Cutter 7.5mm diameter

Trend
Out of stock

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood ...

View full details
£26.22 - £26.22
£26.22
£26.22 - £26.22
£26.22
Sold out
Sold out
£34.66 - £34.66
£34.66
£34.66 - £34.66
£34.66

3/01X1/2TC - Two flute cutter 4mm diameter

Trend
Out of stock

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Suitable...

View full details
£34.66 - £34.66
£34.66
£34.66 - £34.66
£34.66
Sold out
Trend 46/118X1/4TC - Bearing guided ovolo cutter 3mm radius
Trend 46/118X1/4TC - Bearing guided ovolo cutter 3mm radius
Sold out
£82.70 - £82.70
£82.70
£82.70 - £82.70
£82.70

46/118X1/4TC - Bearing guided ovolo cutter 3mm radius

Trend
Out of stock

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a rou...

View full details
£82.70 - £82.70
£82.70
£82.70 - £82.70
£82.70
Sold out
Trend C056X1/4TC - Radius 9.5mm radius x 19.1mm diameter
Trend C056X1/4TC - Radius 9.5mm radius x 19.1mm diameter
Sold out
£45.91 - £45.91
£45.91
£45.91 - £45.91
£45.91

C056X1/4TC - Radius 9.5mm radius x 19.1mm diameter

Trend
Out of stock

These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of...

View full details
£45.91 - £45.91
£45.91
£45.91 - £45.91
£45.91
Sold out
Trend C078X8MMTC - Rounding over 9.5mm radius x 15.9mm cut
Trend C078X8MMTC - Rounding over 9.5mm radius x 15.9mm cut
Sold out
£61.92 - £61.92
£61.92
£61.92 - £61.92
£61.92

C078X8MMTC - Rounding over 9.5mm radius x 15.9mm cut

Trend
Out of stock

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a ro...

View full details
£61.92 - £61.92
£61.92
£61.92 - £61.92
£61.92
Sold out
Sold out
£75.94 - £75.94
£75.94
£75.94 - £75.94
£75.94

10/25X1/2TC - Tapered cutter

Trend
Out of stock

Two flute straight cutter with 3 degree taper. Designed for constructing wooden vacuum forming moulds. Tapered sides will allow the mould to rele...

View full details
£75.94 - £75.94
£75.94
£75.94 - £75.94
£75.94
Sold out
Trend 3/83DCX1/2TC - Two flute 12.7mm diameter x 50mm cut
Trend 3/83DCX1/2TC - Two flute 12.7mm diameter x 50mm cut
Sold out
£61.63 - £61.63
£61.63
£61.63 - £61.63
£61.63

3/83DCX1/2TC - Two flute 12.7mm diameter x 50mm cut

Trend
Out of stock

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

View full details
£61.63 - £61.63
£61.63
£61.63 - £61.63
£61.63
Sold out
Trend FTS/TS/P - Fast track taper preparation stone
Trend FTS/TS/P - Fast track taper preparation stone
Sold out
£22.55 - £22.55
£22.55
£22.55 - £22.55
£22.55

FTS/TS/P - Fast track taper preparation stone

Trend
Out of stock

Roughing taper stone for the Fasttrack sharpening system. 2.5 degree taper to give intermediate angles of 22.5/27.5 degree and 27.5/32.5 degree whe...

View full details
£22.55 - £22.55
£22.55
£22.55 - £22.55
£22.55
Sold out
Trend WP-LOCK/A/T29 - LOCK/JIG/A template 20mm x 240mm rounded ends
Trend WP-LOCK/A/T29 - LOCK/JIG/A template 20mm x 240mm rounded ends
Sold out
£23.94 - £23.94
£23.94
£23.94 - £23.94
£23.94

WP-LOCK/A/T29 - LOCK/JIG/A template 20mm x 240mm rounded ends

Trend
Out of stock

Accessory template for the LOCK/JIG/A.

£23.94 - £23.94
£23.94
£23.94 - £23.94
£23.94
Sold out
Sold out
£15.36 - £15.36
£15.36
£15.36 - £15.36
£15.36

WP-LOCK/T/16 - LOCK/JIG Faceplate Template 26 x 110mm

Trend
Out of stock

Faceplate template for LOCK/JIG and LOCK/JIG/C

£15.36 - £15.36
£15.36
£15.36 - £15.36
£15.36
Sold out
Trend 31/30X1/4TC - Dovetail cutter 97 degrees
Trend 31/30X1/4TC - Dovetail cutter 97 degrees
Sold out
£26.64 - £26.64
£26.64
£26.64 - £26.64
£26.64

31/30X1/4TC - Dovetail cutter 97 degrees

Trend
Out of stock

Cutters for use with the Trend DC400 Dovetail Jig. These cutters have extra long shanks.

£26.64 - £26.64
£26.64
£26.64 - £26.64
£26.64
Sold out
Sold out
£64.07 - £64.07
£64.07
£64.07 - £64.07
£64.07

WP-T32/006 - Motor for T32

Trend
Out of stock

Replacement motor for the T32 extractor

£64.07 - £64.07
£64.07
£64.07 - £64.07
£64.07
Sold out
Trend 90/12X1/2TC - Traditional torus cutter
Trend 90/12X1/2TC - Traditional torus cutter
Sold out
£136.28 - £136.28
£136.28
£136.28 - £136.28
£136.28

90/12X1/2TC - Traditional torus cutter

Trend
Out of stock

Classic skirting board mould.

£136.28 - £136.28
£136.28
£136.28 - £136.28
£136.28
Sold out
Trend 46/11X1/2TC - Bearing guided ovolo cutter 3.2mm radius
Trend 46/11X1/2TC - Bearing guided ovolo cutter 3.2mm radius
Sold out
£82.70 - £82.70
£82.70
£82.70 - £82.70
£82.70

46/11X1/2TC - Bearing guided ovolo cutter 3.2mm radius

Trend
Out of stock

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a rou...

View full details
£82.70 - £82.70
£82.70
£82.70 - £82.70
£82.70
Sold out
Trend 46/57X1/2TC - Guided staff bead cutter
Trend 46/57X1/2TC - Guided staff bead cutter
Sold out
£147.32 - £147.32
£147.32
£147.32 - £147.32
£147.32

46/57X1/2TC - Guided staff bead cutter

Trend
Out of stock

Ideal for producing nosings and attractive edges.

£147.32 - £147.32
£147.32
£147.32 - £147.32
£147.32
Sold out

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare