Skip to content
About Us – Northants Trade Contact Information Advice & Guides
Trade Prices. Maximum Choice.
Trade Prices. Maximum Choice.

Trend eBay

Sold out
£131.81 - £131.81
£131.81
£131.81 - £131.81
£131.81

TR/PACK/3 - Trade pack worktop cutter TR17DX1/2TC x 3 pieces

Trend
Out of stock

Trend Trade Kitchen Fitters Pack - 3x straight cutters with centre tip Three 1/2in diameter cutters for kitchen worktop jointing, cutting the joint...

View full details
£131.81 - £131.81
£131.81
£131.81 - £131.81
£131.81
Sold out
Sold out
£136.28 - £136.28
£136.28
£136.28 - £136.28
£136.28

15/1X1/2TC - Cove cutter 19.1mm radius

Trend
Out of stock

For coves and part of a rule joint.

£136.28 - £136.28
£136.28
£136.28 - £136.28
£136.28
Sold out
Sold out
£97.18 - £97.18
£97.18
£97.18 - £97.18
£97.18

46/34X1/2TC - Bearing guided bevel cutter 25 degrees

Trend
Out of stock

Larger bearing removes the flat. Supplied with two bearings.

£97.18 - £97.18
£97.18
£97.18 - £97.18
£97.18
Sold out
Sold out
£22.74 - £22.74
£22.74
£22.74 - £22.74
£22.74

AB/125/M25 - 125mm 60G/120G/180G/240G Random Orbital Sanding Disc, 25 Pack

Trend
Out of stock

High-performance, multi-material abrasives suitable for wood, paint, plastic, filler, plaster and metal. Available in 40, 60, 80, 120, 150, 180 and...

View full details
£22.74 - £22.74
£22.74
£22.74 - £22.74
£22.74
Sold out
Sold out
£34.66 - £34.66
£34.66
£34.66 - £34.66
£34.66

C033AX8MMTC - Two flute cutter 25.0mm diameter

Trend
Out of stock

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood ...

View full details
£34.66 - £34.66
£34.66
£34.66 - £34.66
£34.66
Sold out
Sold out
£56.98 - £56.98
£56.98
£56.98 - £56.98
£56.98

11/40X1/4TC - Panel mould cutter

Trend
Out of stock

Template thickness should be at least 5mm thicker than cutter cut length of cutter. Approximately 1.0mm flat will be found on the nose.

£56.98 - £56.98
£56.98
£56.98 - £56.98
£56.98
Sold out
Sold out
£72.70 - £72.70
£72.70
£72.70 - £72.70
£72.70

C063X1/4TC - Self guided radius 12.7mm

Trend
Out of stock

Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with.The guide bearing follows the vertical edge or template. ...

View full details
£72.70 - £72.70
£72.70
£72.70 - £72.70
£72.70
Sold out
Sold out
£54.46 - £54.46
£54.46
£54.46 - £54.46
£54.46

WP-T12/864 - Kitbox insert for T12 & T14 routers

Trend
Out of stock

Replacement Kitbox insert for T12 & T14 routers

£54.46 - £54.46
£54.46
£54.46 - £54.46
£54.46
Sold out
Sold out
£16.56 - £16.56
£16.56
£16.56 - £16.56
£16.56

WP-CNCY/035 - Y Limit Switch Extension for SmartBench

Trend
Out of stock

This will split your current Y axis limit switches into two easily exchangeable switches. This loom splits the Y axis limit switches to allow for e...

View full details
£16.56 - £16.56
£16.56
£16.56 - £16.56
£16.56
Sold out
Sold out
£16.84 - £16.84
£16.84
£16.84 - £16.84
£16.84

C007X1/4TC - Two Flute Cutter 6.3mm diameter

Trend
Out of stock

Trend Craft Pro 1/4in shank straight router cutter - 6.3mm diameter Two Flute Carbide tips Two flute carbide TCT tips for cleaner cutting edges an...

View full details
£16.84 - £16.84
£16.84
£16.84 - £16.84
£16.84
Sold out
Sold out
£72.70 - £72.70
£72.70
£72.70 - £72.70
£72.70

C066X1/4TC - Cavetto 7.9mm radius

Trend
Out of stock

Self guiding cavetto style cutter, which follow the board edges for straight or curved work radius.

£72.70 - £72.70
£72.70
£72.70 - £72.70
£72.70
Sold out
Sold out
£38.00 - £38.00
£38.00
£38.00 - £38.00
£38.00

WP-T12/126 - Dust Port Assembly for the T12 & T14 routers.

Trend
Out of stock

Dust Port Assembly for the T12 & T14 routers.

£38.00 - £38.00
£38.00
£38.00 - £38.00
£38.00
Sold out
Sold out
£41.42 - £41.42
£41.42
£41.42 - £41.42
£41.42

6200/8TC - Adjustable countersink 5/8 inch diameter

Trend
Out of stock

They are designed to drill and coutersink simultaneously, a wide variety of materials. Supplied with a HSS slow spiral drill bit. Fully adjusta...

View full details
£41.42 - £41.42
£41.42
£41.42 - £41.42
£41.42
Sold out
Sold out
£172.48 - £172.48
£172.48
£172.48 - £172.48
£172.48

WP-T18/R14115 - Motor Assembly T18S/R14

Trend
Out of stock

Replacement Motor Assembly for T18S/R14

£172.48 - £172.48
£172.48
£172.48 - £172.48
£172.48
Sold out
Sold out
£53.57 - £53.57
£53.57
£53.57 - £53.57
£53.57

4/60X1/4TC - Two flute cutter 22mm diameter

Trend
Out of stock

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

View full details
£53.57 - £53.57
£53.57
£53.57 - £53.57
£53.57
Sold out
Sold out
£45.91 - £45.91
£45.91
£45.91 - £45.91
£45.91

46/910X1/4TC - Guided profiler 12.7mm dia x 4mm cut

Trend
Out of stock

Profiler with shank mounted bearing guides. For use with router mounted above or below a table when following a template. For profiling and rebat...

View full details
£45.91 - £45.91
£45.91
£45.91 - £45.91
£45.91
Sold out
Sold out
£65.92 - £65.92
£65.92
£65.92 - £65.92
£65.92

C140X1/4TC - Corner bead 3.2mm radius

Trend
Out of stock

Attractive edge moulds.A full corner bead can be produced by making a second pass at 90 degrees.

£65.92 - £65.92
£65.92
£65.92 - £65.92
£65.92
Sold out
Sold out
£16.33 - £16.33
£16.33
£16.33 - £16.33
£16.33

WP-VJS/07B - Varijig Extrusion 430mm Black

Trend
Out of stock

Replacement extrusion for the Vari jig.

£16.33 - £16.33
£16.33
£16.33 - £16.33
£16.33
Sold out
Sold out
£19.66 - £19.66
£19.66
£19.66 - £19.66
£19.66

WP-T18/BJ088 - Angle Frame Assembly T18S/BJ

Trend
Out of stock

Replacement angle frame assembly for T18S/BJ.

£19.66 - £19.66
£19.66
£19.66 - £19.66
£19.66
Sold out
Sold out
£131.81 - £131.81
£131.81
£131.81 - £131.81
£131.81

46/38X1/2TC - Bearing guided chamfer cutter 45 degrees

Trend
Out of stock

Ideal for newel posts and caps for stairs. Supplied with one bearing.

£131.81 - £131.81
£131.81
£131.81 - £131.81
£131.81
Sold out
Sold out
£30.17 - £30.17
£30.17
£30.17 - £30.17
£30.17

C115X1/4TC - Self guided trimmer 9.5mm diameter

Trend
Out of stock

Used for trimming plastic or plywood overlays.Also for copy profiling with a template.

£30.17 - £30.17
£30.17
£30.17 - £30.17
£30.17
Sold out
Sold out
£39.10 - £39.10
£39.10
£39.10 - £39.10
£39.10

C143X1/4TC - Slotting 3.2mm cut

Trend
Out of stock

These two wing Tungsten Carbide Tipped slotting cutters are ideal for grooving and rebating operations. A 12.7mm diameter bearing is supplied with...

View full details
£39.10 - £39.10
£39.10
£39.10 - £39.10
£39.10
Sold out
Sold out
£67.62 - £67.62
£67.62
£67.62 - £67.62
£67.62

3/73DMX1/2TC - Two flute 12mm dia x 50mm cut x84mm

Trend
Out of stock

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

View full details
£67.62 - £67.62
£67.62
£67.62 - £67.62
£67.62
Sold out
Sold out
£43.60 - £43.60
£43.60
£43.60 - £43.60
£43.60

C179X12MMTC - Dovetail 19.1mm x 97 degrees x 25mm cut

Trend
Out of stock

These cutters are for Trend Craft Dovetail Jigs.

£43.60 - £43.60
£43.60
£43.60 - £43.60
£43.60
Sold out

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare
×

Trade Prices, Delivered

5% OFF

Join our trade mailing list and get 5% off your first order plus exclusive trade deals.

No thanks, I'll pay full price

You're In!

Check your email for your discount code.
Use code: TRADE5