Skip to content
About Us – Northants Trade Contact Information Advice & Guides
Trade Prices. Maximum Choice.
Trade Prices. Maximum Choice.

Trend eBay

Sold out
£120.54 - £120.54
£120.54
£120.54 - £120.54
£120.54

34/40TC - Slotter 10mm kerf 12mm bore

Trend
Out of stock

These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bear...

View full details
£120.54 - £120.54
£120.54
£120.54 - £120.54
£120.54
Sold out
Sold out
£70.38 - £70.38
£70.38
£70.38 - £70.38
£70.38

C158X1/2TC - Tongue and groover set 41mm diameter

Trend
Out of stock

A one piece set. Parts are inter-changed on the arbor to alter the set-up. For use with router table only.

£70.38 - £70.38
£70.38
£70.38 - £70.38
£70.38
Sold out
Sold out
£15.36 - £15.36
£15.36
£15.36 - £15.36
£15.36

WP-LOCK/T/9 - Lock template 25.4mm x 165.5mm faceplate

Trend
Out of stock

Replacement face plate template 9 for the LOCK/JIG.

£15.36 - £15.36
£15.36
£15.36 - £15.36
£15.36
Sold out
Sold out
£95.00 - £95.00
£95.00
£95.00 - £95.00
£95.00

47/50SX1/2TC - Pierce and trim cutter

Trend
Out of stock

Combination pierce and trim cutters. Pierce and cut out apertures in laminate worktops. Base of the cutter acting as a guide follower. Specially d...

View full details
£95.00 - £95.00
£95.00
£95.00 - £95.00
£95.00
Sold out
Sold out
£15.36 - £15.36
£15.36
£15.36 - £15.36
£15.36

WP-LOCK/T/224 - Lock Template 25mm x 101mm faceplate

Trend
Out of stock

Accessory template for the LOCK/JIG.

£15.36 - £15.36
£15.36
£15.36 - £15.36
£15.36
Sold out
Sold out
£30.17 - £30.17
£30.17
£30.17 - £30.17
£30.17

C126X1/4TC - Rounding over 4.8mm radius x 12.7mm cut

Trend
Out of stock

For producing ovolo and rounding over edge moulds, using a side fence or back fence.

£30.17 - £30.17
£30.17
£30.17 - £30.17
£30.17
Sold out
Sold out
£135.19 - £135.19
£135.19
£135.19 - £135.19
£135.19

13/60X1/2TC - Radius cutter 16mm radius

Trend
Out of stock

For coves and part of a rule joint.

£135.19 - £135.19
£135.19
£135.19 - £135.19
£135.19
Sold out
Sold out
£245.99 - £245.99
£245.99
£245.99 - £245.99
£245.99

T33AL - 800W Wet & Dry M-Class Dust Extractor 110V 16A Uk & Ireland only

Trend
Out of stock

Trade-rated wet & dry M-Class dust extractor with power take-off for workshop, site and trade use. Ideal for power tool applications, dealing w...

View full details
£245.99 - £245.99
£245.99
£245.99 - £245.99
£245.99
Sold out
Sold out
£45.68 - £45.68
£45.68
£45.68 - £45.68
£45.68

DWS/TF6/F - Tapered File 6 inch Fine

Trend
Out of stock

The most unique versatile half round/flat tapered file suitable for woodworking, gardening & domestic tooling. Precision quality taper file. Fi...

View full details
£45.68 - £45.68
£45.68
£45.68 - £45.68
£45.68
Sold out
Sold out
£115.03 - £115.03
£115.03
£115.03 - £115.03
£115.03

46/39X1/4TC - Bearing Guided 35mm Diameter Rebater

Trend
Out of stock

Popular rebate sets, which include different size bearings for a choice of rebates. Ease of setting-up and accurate depth of cut. Ideal for rebatin...

View full details
£115.03 - £115.03
£115.03
£115.03 - £115.03
£115.03
Sold out
Sold out
£77.17 - £77.17
£77.17
£77.17 - £77.17
£77.17

46/20X1/4TC - Guided trimmer 19.1mm diameter 25mm length

Trend
Out of stock

Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to f...

View full details
£77.17 - £77.17
£77.17
£77.17 - £77.17
£77.17
Sold out
Sold out
£50.38 - £50.38
£50.38
£50.38 - £50.38
£50.38

11/3X8MMTC - Chamfer V groove cutter 45 degrees

Trend
Out of stock

Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Is ideal for imitating 'V' jo...

View full details
£50.38 - £50.38
£50.38
£50.38 - £50.38
£50.38
Sold out
Sold out
£22.55 - £22.55
£22.55
£22.55 - £22.55
£22.55

FTS/TS/SFF - Fast track taper super fine finishing stone 1200 grit green

Trend
Out of stock

Roughing taper stone for the Fasttrack sharpening system. 2.5 degree taper to give intermediate angles of 22.5/27.5 degree and 27.5/32.5 degree whe...

View full details
£22.55 - £22.55
£22.55
£22.55 - £22.55
£22.55
Sold out
Sold out
£152.15 - £152.15
£152.15
£152.15 - £152.15
£152.15

WP-T10EL/103 - Speed Control Circuit Board 115V

Trend
Out of stock

Speed control circuit board 115v for the T10 & T11 router.

£152.15 - £152.15
£152.15
£152.15 - £152.15
£152.15
Sold out
Sold out
£15.20 - £15.20
£15.20
£15.20 - £15.20
£15.20

AB/PAD/M3 - 150 x 230mm Assorted Flexible Finishing Pads, 3 Pack

Trend
Out of stock

High-performance, versatile, abrasive finishing pads. Ideal for paint removal, surface preparation, cleaning, polishing, waxing & finishing acr...

View full details
£15.20 - £15.20
£15.20
£15.20 - £15.20
£15.20
Sold out
Sold out
£34.24 - £34.24
£34.24
£34.24 - £34.24
£34.24

C044AX1/4TC - Chamfer V groove cutter angle=45 degrees

Trend
Out of stock

For veining, panelling, 'V' grooving, bevelling & chamfering.

£34.24 - £34.24
£34.24
£34.24 - £34.24
£34.24
Sold out
Sold out
£29.14 - £29.14
£29.14
£29.14 - £29.14
£29.14

C171X1/4TC - Two flute cutter 12mm diameter

Trend
Out of stock

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood ...

View full details
£29.14 - £29.14
£29.14
£29.14 - £29.14
£29.14
Sold out
Sold out
£20.22 - £20.22
£20.22
£20.22 - £20.22
£20.22

620/6WS - Countersink 6mm diameter

Trend
Out of stock

Trend High Carbon Steel Countersink for 6mm drills - 16mm diameter The ideal countersink for use with your own 6mm diameter drill bit on hard and s...

View full details
£20.22 - £20.22
£20.22
£20.22 - £20.22
£20.22
Sold out
Sold out
£119.22 - £119.22
£119.22
£119.22 - £119.22
£119.22

46/56X1/2TC - Guided staff bead cutter

Trend
Out of stock

Ideal for producing nosings and attractive edges.

£119.22 - £119.22
£119.22
£119.22 - £119.22
£119.22
Sold out
Sold out
£31.27 - £31.27
£31.27
£31.27 - £31.27
£31.27

C178X8MMTC - Dovetail 12.7mm x 98 degrees x 20mm Cut

Trend
Out of stock

These cutters are for Trend Craft Dovetail Jigs.

£31.27 - £31.27
£31.27
£31.27 - £31.27
£31.27
Sold out
Sold out
£64.86 - £64.86
£64.86
£64.86 - £64.86
£64.86

4/5X1/4TC - Two flute cutter 19.1mm diameter

Trend
Out of stock

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

View full details
£64.86 - £64.86
£64.86
£64.86 - £64.86
£64.86
Sold out
Sold out
£15.36 - £15.36
£15.36
£15.36 - £15.36
£15.36

WP-LOCK/T/273 - Lock Template 27mm x 166mm faceplate rounded ends

Trend
Out of stock

Accessory template for the LOCK/JIG.

£15.36 - £15.36
£15.36
£15.36 - £15.36
£15.36
Sold out
Sold out
£19.20 - £19.20
£19.20
£19.20 - £19.20
£19.20

WP-CNCY/081 - Replacement Square End Cap Threaded for the SmartBench

Trend
Out of stock

Replacement Square End Cap Threaded for the Trend Yeti CNC SmartBenchCompatible with all SmartBench variants.

£19.20 - £19.20
£19.20
£19.20 - £19.20
£19.20
Sold out
Sold out
£67.60 - £67.60
£67.60
£67.60 - £67.60
£67.60

WP-T35/037 - Hose 39mm x 5m with adaptor & bayonet T35

Trend
Out of stock

Replacement Hose 39mm x 5m with adaptor & bayonet T35.

£67.60 - £67.60
£67.60
£67.60 - £67.60
£67.60
Sold out

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare
×

Trade Prices, Delivered

5% OFF

Join our trade mailing list and get 5% off your first order plus exclusive trade deals.

No thanks, I'll pay full price

You're In!

Check your email for your discount code.
Use code: TRADE5