Skip to content
About Us – Northants Trade Contact Information Advice & Guides
Trade Prices. Maximum Choice.
Trade Prices. Maximum Choice.

Trend eBay

Sold out
£38.05 - £38.05
£38.05
£38.05 - £38.05
£38.05

C196X1/2TC - Bearing guided trimmer 12.7mm diameter

Trend
Out of stock

Used for trimming plastic or plywood overlays.Also for copy profiling with a template.

£38.05 - £38.05
£38.05
£38.05 - £38.05
£38.05
Sold out
Sold out
£21.24 - £21.24
£21.24
£21.24 - £21.24
£21.24

C013X1/4TC - Two Flute Cutter 9.5mm diameter

Trend
Out of stock

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood ...

View full details
£21.24 - £21.24
£21.24
£21.24 - £21.24
£21.24
Sold out
Sold out
£82.70 - £82.70
£82.70
£82.70 - £82.70
£82.70

46/118X1/2TC - Bearing guided ovolo cutter 3mm radius

Trend
Out of stock

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a rou...

View full details
£82.70 - £82.70
£82.70
£82.70 - £82.70
£82.70
Sold out
Sold out
£84.82 - £84.82
£84.82
£84.82 - £84.82
£84.82

46/06X1/4TC - Combi trimmer 24mm diameter

Trend
Out of stock

A self-guided combination trimmer. A 90 degree trim is obtained by engaging the bottom half. A 45 degree trim is obtained by lowering the cutter...

View full details
£84.82 - £84.82
£84.82
£84.82 - £84.82
£84.82
Sold out
Sold out
£48.04 - £48.04
£48.04
£48.04 - £48.04
£48.04

C048X1/4TC - Chamfer angle= 45 degrees

Trend
Out of stock

Two flute cutters for producing extra clean cut bevelled edges. No plunge cut.

£48.04 - £48.04
£48.04
£48.04 - £48.04
£48.04
Sold out
Sold out
£28.22 - £28.22
£28.22
£28.22 - £28.22
£28.22

WP-T31/033 - Pre-filter T31

Trend
Out of stock

Replacement pre-filter T31

£28.22 - £28.22
£28.22
£28.22 - £28.22
£28.22
Sold out
Sold out
£24.66 - £24.66
£24.66
£24.66 - £24.66
£24.66

C015X8MMTC - Two Flute Cutter 9.5mm diameter

Trend
Out of stock

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood ...

View full details
£24.66 - £24.66
£24.66
£24.66 - £24.66
£24.66
Sold out
Sold out
£31.67 - £31.67
£31.67
£31.67 - £31.67
£31.67

C116X1/2TC - Self guided trimmer 12.7mm diameter

Trend
Out of stock

Trend Craft Pro 1/2in shank bearing guided flush trimming cutter - 12.7mm diameter Two Flute Carbide tips. Two flute carbide TCT tips for clean, p...

View full details
£31.67 - £31.67
£31.67
£31.67 - £31.67
£31.67
Sold out
Sold out
£42.53 - £42.53
£42.53
£42.53 - £42.53
£42.53

3/22X1/4TC - Two flute cutter 6.3mm diameter

Trend
Out of stock

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges.

£42.53 - £42.53
£42.53
£42.53 - £42.53
£42.53
Sold out
Sold out
£44.65 - £44.65
£44.65
£44.65 - £44.65
£44.65

C074X1/4TC - Rounding over 3.2mm radius x 9.5mm cut

Trend
Out of stock

Trend Craft Pro 1/4in shank bearing guided round over router cutter - 1/8in radius Two Flute Carbide tips. Two flute carbide TCT tips for cleaner ...

View full details
£44.65 - £44.65
£44.65
£44.65 - £44.65
£44.65
Sold out
Sold out
£136.28 - £136.28
£136.28
£136.28 - £136.28
£136.28

18/24X1/2TC - Ogee panel raiser cutter

Trend
Out of stock

Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed p...

View full details
£136.28 - £136.28
£136.28
£136.28 - £136.28
£136.28
Sold out
Sold out
£59.44 - £59.44
£59.44
£59.44 - £59.44
£59.44

WP-AIR/PM/02 - Face Seal for AIR/PRO/M

Trend
Out of stock

Replacement face seal for AIR/PRO/M

£59.44 - £59.44
£59.44
£59.44 - £59.44
£59.44
Sold out
Sold out
£41.42 - £41.42
£41.42
£41.42 - £41.42
£41.42

2/10X1/4TC - Single flute cutter 2mm diameter

Trend
Out of stock

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix ...

View full details
£41.42 - £41.42
£41.42
£41.42 - £41.42
£41.42
Sold out
Sold out
£48.68 - £48.68
£48.68
£48.68 - £48.68
£48.68

3/8LX1/4TC - Two flute cutter 12mm diameter

Trend
Out of stock

Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges. Corners will require final trimm...

View full details
£48.68 - £48.68
£48.68
£48.68 - £48.68
£48.68
Sold out
Sold out
£20.53 - £20.53
£20.53
£20.53 - £20.53
£20.53

C013X1/2TC - Two Flute Cutter 9.5mm diameter

Trend
Out of stock

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood ...

View full details
£20.53 - £20.53
£20.53
£20.53 - £20.53
£20.53
Sold out
Sold out
£116.06 - £116.06
£116.06
£116.06 - £116.06
£116.06

13/20X1/2TC - Cove cutter 9.5mm radius

Trend
Out of stock

For coves and part of a rule joint.

£116.06 - £116.06
£116.06
£116.06 - £116.06
£116.06
Sold out
Sold out
£114.58 - £114.58
£114.58
£114.58 - £114.58
£114.58

4/52X1/2TC - Two flute cutter 19.1mm diameter

Trend
Out of stock

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

View full details
£114.58 - £114.58
£114.58
£114.58 - £114.58
£114.58
Sold out
Sold out
£42.53 - £42.53
£42.53
£42.53 - £42.53
£42.53

50/10X8MMHSSE - Helical plunge cutter 10mm diameter

Trend
Out of stock

Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine ...

View full details
£42.53 - £42.53
£42.53
£42.53 - £42.53
£42.53
Sold out
Sold out
£60.37 - £60.37
£60.37
£60.37 - £60.37
£60.37

11/1X1/4TC - Chamfer V groove cutter 30 degrees

Trend
Out of stock

Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose.

£60.37 - £60.37
£60.37
£60.37 - £60.37
£60.37
Sold out
Sold out
£15.36 - £15.36
£15.36
£15.36 - £15.36
£15.36

WP-LOCK/T/238 - Lock Template 25.2mm x 110mm faceplate

Trend
Out of stock

Accessory template for the LOCK/JIG.

£15.36 - £15.36
£15.36
£15.36 - £15.36
£15.36
Sold out
Sold out
£92.63 - £92.63
£92.63
£92.63 - £92.63
£92.63

40/14X1/4TC - Bearing guided ovolo cutter 9.5mm radius

Trend
Out of stock

Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding. The smaller bearing gives a 3.2mm quirk.

£92.63 - £92.63
£92.63
£92.63 - £92.63
£92.63
Sold out
Sold out
£19.14 - £19.14
£19.14
£19.14 - £19.14
£19.14

C124X1/4TC - Straight 12.7mm diameter x 12.7mm cut

Trend
Out of stock

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood ...

View full details
£19.14 - £19.14
£19.14
£19.14 - £19.14
£19.14
Sold out
Sold out
£125.41 - £125.41
£125.41
£125.41 - £125.41
£125.41

2214/1WS - Plug maker match 1 inch diameter

Trend
Out of stock

Precision made plug makers for use on natural timber, exactly matching the holes produced by the Saw Tooth Forstners groups 1306 & 1307. These ...

View full details
£125.41 - £125.41
£125.41
£125.41 - £125.41
£125.41
Sold out
Sold out
£53.99 - £53.99
£53.99
£53.99 - £53.99
£53.99

WP-SJA/12 - Sub base only for Stairjig A

Trend
Out of stock

Replacement sub-base for the Stair casing jigs.

£53.99 - £53.99
£53.99
£53.99 - £53.99
£53.99
Sold out

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare
×

Trade Prices, Delivered

5% OFF

Join our trade mailing list and get 5% off your first order plus exclusive trade deals.

No thanks, I'll pay full price

You're In!

Check your email for your discount code.
Use code: TRADE5