Skip to content
About Us – Northants Trade Contact Information Advice & Guides
Trade Prices. Maximum Choice.
Trade Prices. Maximum Choice.

Shop All Trend

Sold out
£79.52 - £79.52
£79.52
£79.52 - £79.52
£79.52

34/61X1/2TC - Intumescent cutter set 15mm x 4mm x 27.05mm

Trend
Out of stock

Bearing guided intumescent strip cutter for routing the groove for intumescent strip in a frame or door. Two sizes available to suit 4mm thick stri...

View full details
£79.52 - £79.52
£79.52
£79.52 - £79.52
£79.52
Sold out
Sold out
£48.04 - £48.04
£48.04
£48.04 - £48.04
£48.04

C057X1/4TC - Radius 11.1mm radius x 22.2mm diameter

Trend
Out of stock

These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of...

View full details
£48.04 - £48.04
£48.04
£48.04 - £48.04
£48.04
Sold out
Sold out
£4.03 - £4.03
£4.03
£4.03 - £4.03
£4.03

CSB/BW27 - Craft bush washer

Trend
Out of stock

Bushing washers supplied to reduce bore diameter for certain makes and models of saw. The bushing washers must be pressed or glued into blade bod...

View full details
£4.03 - £4.03
£4.03
£4.03 - £4.03
£4.03
Sold out
Sold out
£46.97 - £46.97
£46.97
£46.97 - £46.97
£46.97

11/5X1/4TC - Chamfer V groove cutter 60 degrees

Trend
Out of stock

Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose.

£46.97 - £46.97
£46.97
£46.97 - £46.97
£46.97
Sold out
Sold out
£63.78 - £63.78
£63.78
£63.78 - £63.78
£63.78

46/19X1/4TC - Double Overlap cutter

Trend
Out of stock

Roughing cutter which leaves an overhang of 3mm, for secondary final trimming.Life can be extended by varying height of cutter.

£63.78 - £63.78
£63.78
£63.78 - £63.78
£63.78
Sold out
Sold out
£2.41 - £2.41
£2.41
£2.41 - £2.41
£2.41

WP-VJS/06 - Varijig end cap for extrusion

Trend
Out of stock

Replacement extrusion end cap for the Vari jig.

£2.41 - £2.41
£2.41
£2.41 - £2.41
£2.41
Sold out
Sold out
£32.46 - £32.46
£32.46
£32.46 - £32.46
£32.46

WP-T12EL/046 - Carbon Brush 110V (1 Pr) T12

Trend
Out of stock

Pair of carbon 110V brushes for the T12 router.

£32.46 - £32.46
£32.46
£32.46 - £32.46
£32.46
Sold out
Sold out
£54.43 - £54.43
£54.43
£54.43 - £54.43
£54.43

CSB/CC19060T - Trend Wood Cordless Mitre Saw Blade 190mm x 20mm x 60T

Trend
Out of stock

A range of thin kerf tungsten carbide tipped blades for cross-cutting wood and wood-based materials using cordless Mitre saws. Ideal for timber ski...

View full details
£54.43 - £54.43
£54.43
£54.43 - £54.43
£54.43
Sold out
Sold out
£11.22 - £11.22
£11.22
£11.22 - £11.22
£11.22

SNAP/CS/10 - Trend Snappy Countersink with 1/8 (3.2mm) Drill

Trend
Out of stock

Trend Snappy 9.5mm diameter countersink - with adjustable drill 9.5mm diameter countersink for up to 10 gauge Imperial screws. The perfect, fast ...

View full details
£11.22 - £11.22
£11.22
£11.22 - £11.22
£11.22
Sold out
Sold out
£13.98 - £13.98
£13.98
£13.98 - £13.98
£13.98

AB/150/120A - 150mm 120G Random Orbital Sanding Disc, 10 Pack

Trend
Out of stock

High-performance, multi-material abrasives suitable for wood, paint, plastic, filler, plaster and metal. Available in 40, 60, 80, 120, 150, 180 and...

View full details
£13.98 - £13.98
£13.98
£13.98 - £13.98
£13.98
Sold out
Sold out
£121.72 - £121.72
£121.72
£121.72 - £121.72
£121.72

WP-CNCY/009 - SmartBench Complete Dust Shoe

Trend
Out of stock

Replacement Dust Shoe is compatible with any Trend Yeti CNC SmartBench with Z Head version 2. Complete SmartBench Dust Shoe for effective dust ext...

View full details
£121.72 - £121.72
£121.72
£121.72 - £121.72
£121.72
Sold out
Sold out
£44.65 - £44.65
£44.65
£44.65 - £44.65
£44.65

46/902X1/4TC - Guided profiler 9.5mm dia x 12.7mm cut

Trend
Out of stock

Trend Professional 1/4in shank bearing guided trimming cutter - 9.5mm diameter for laminate and template work 9.5mm diameter X 12.7mm cutting depth...

View full details
£44.65 - £44.65
£44.65
£44.65 - £44.65
£44.65
Sold out
Sold out
£78.25 - £78.25
£78.25
£78.25 - £78.25
£78.25

7E/3X1/4TC - Pin guided round over cutter

Trend
Out of stock

Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters.

£78.25 - £78.25
£78.25
£78.25 - £78.25
£78.25
Sold out
Sold out
£52.96 - £52.96
£52.96
£52.96 - £52.96
£52.96

CSB/21036 - Trend Wood Circular Saw Blade 210mm x 30mm x 36T

Trend
Out of stock

A range of tungsten carbide tipped blades for wood and wood-based materials. For use in circular, plunge and table saws, and available in a range o...

View full details
£52.96 - £52.96
£52.96
£52.96 - £52.96
£52.96
Sold out
Sold out
£9.53 - £9.53
£9.53
£9.53 - £9.53
£9.53

WP-T32/050 - Power tool adaptor for the T32 and T33

Trend
Out of stock

Replacement power tool adaptor for T32 and T33 extractorsPower tool adaptor has a taper to accept hose from 32 mm to 36 mm

£9.53 - £9.53
£9.53
£9.53 - £9.53
£9.53
Sold out
Sold out
£11.02 - £11.02
£11.02
£11.02 - £11.02
£11.02

AB/125/120A - 125mm 120G Random Orbital Sanding Disc, 10 Pack

Trend
Out of stock

High-performance, multi-material abrasives suitable for wood, paint, plastic, filler, plaster and metal. Available in 40, 60, 80, 120, 150, 180 and...

View full details
£11.02 - £11.02
£11.02
£11.02 - £11.02
£11.02
Sold out
Sold out
£48.04 - £48.04
£48.04
£48.04 - £48.04
£48.04

CSB/19040TB - Trend Wood Cordless Circular Saw Blade 190mm x 30mm x 40T

Trend
Out of stock

A range of thin kerf tungsten carbide tipped blades for wood and wood-based materials. For use in cordless circular, plunge and table saws, and ava...

View full details
£48.04 - £48.04
£48.04
£48.04 - £48.04
£48.04
Sold out
Sold out
£4.37 - £4.37
£4.37
£4.37 - £4.37
£4.37

WP-SPAN/95P - Spanner 9.5mm (3/8 inch) A/F pressed steel

Trend
Out of stock

Replacement spanner.

£4.37 - £4.37
£4.37
£4.37 - £4.37
£4.37
Sold out
Sold out
£10.40 - £10.40
£10.40
£10.40 - £10.40
£10.40

AB/QTR/150M - Mesh 1/4 Sanding Sheet 5pc 115mm x 115mm 150 grit

Trend
Out of stock

High performance multi-material long life Silicon Carbide Mesh abrasive for 115mm x 115mm 1/4 Sheet Sanders. Suitable for wood, paint, plaster and ...

View full details
£10.40 - £10.40
£10.40
£10.40 - £10.40
£10.40
Sold out
Sold out
£3.34 - £3.34
£3.34
£3.34 - £3.34
£3.34

WP-E/SB01 - EasyScribe graphite clamp

Trend
Out of stock

Spare graphite clamp assembly for the Easyscribe tool.

£3.34 - £3.34
£3.34
£3.34 - £3.34
£3.34
Sold out
Sold out
£39.18 - £39.18
£39.18
£39.18 - £39.18
£39.18

SNAP/MB/35DS - Trend Snappy 35mm machine bit w/depth stop

Trend
Out of stock

Trend Snappy 35mm Drill - With Depth Stop The perfect accessory for drilling consistent 35mm diameter holes for circular hinges in kitchen and cabi...

View full details
£39.18 - £39.18
£39.18
£39.18 - £39.18
£39.18
Sold out
Sold out
£26.68 - £26.68
£26.68
£26.68 - £26.68
£26.68

SNAP/MB/35TC - Trend Snappy machine bit 35mm diameter

Trend
Out of stock

Trend Snappy 35mm Drill - For Euro Hinges The perfect accessory for drilling consistent 35mm diameter holes for circular hinges in kitchen and cabi...

View full details
£26.68 - £26.68
£26.68
£26.68 - £26.68
£26.68
Sold out
Sold out
£5.86 - £5.86
£5.86
£5.86 - £5.86
£5.86

SNAP/MD/5 - Trend Snappy masonry drill 5mm

Trend
Out of stock

Trend snappy Masonry Drill - 5mm Diameter Single piece construction for durable, long life performance TCT (Tungsten Carbide Tipped) bit for use on...

View full details
£5.86 - £5.86
£5.86
£5.86 - £5.86
£5.86
Sold out
Sold out
£111.61 - £111.61
£111.61
£111.61 - £111.61
£111.61

C170X1/2TC - Bearing guided bevel panel raiser 15 degrees

Trend
Out of stock

Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural t...

View full details
£111.61 - £111.61
£111.61
£111.61 - £111.61
£111.61
Sold out

Introduction to Trend

Trend is a renowned name in the world of trade supplies, celebrated for its commitment to quality and innovation. Established with a vision to provide top-notch tools and supplies to professionals, Trend has grown to become a trusted brand among trade experts across the UK. Known for their precision engineering and durable products, Trend has maintained a strong reputation for delivering performance-driven solutions to both professionals and DIY enthusiasts alike. Whether you're looking for cutting-edge power tools or reliable hand tools, Trend is a brand that consistently meets the high standards expected in the industry.

Explore the Trend Product Range

Trend offers an extensive range of products designed to meet the diverse needs of trade professionals. Their portfolio includes:

  • Power Tools: From routers to saws, Trend's power tools are engineered for precision and reliability.
  • Hand Tools: Crafted with care, their hand tools provide excellent ergonomics and durability.
  • Fixings and Accessories: Trend supplies a wide variety of fixings and essential accessories that ensure a complete solution for any project.
  • Woodworking Supplies: Known for their innovation in woodworking, Trend’s selection includes router bits, jigs, and guides.

Among their flagship lines, Trend's router technology stands out, offering unmatched precision and efficiency, making it a favourite among woodworkers and builders.

Why Trade Professionals Choose Trend

Trade professionals across the UK trust Trend for several reasons:

  • Quality and Durability: Trend products are built to last, with a focus on robust construction and high-quality materials.
  • Innovation and Technology: Continuous investment in R&D ensures that Trend tools feature the latest technological advancements.
  • Warranty and Support: Trend backs its products with comprehensive warranties and dedicated customer support, offering peace of mind.
  • Value for Money: Trend provides excellent value, balancing cost with exceptional performance and longevity.

Trend at Northants Trade

At Northants Trade, we pride ourselves on stocking a comprehensive range of Trend products, catering to the varied needs of our customers. Our competitive trade prices ensure you get the best value, while our knowledgeable staff are always ready to offer expert advice tailored to your specific requirements. We also provide fast delivery services across the UK, ensuring you receive your Trend supplies promptly to keep your projects on schedule.

Call to Action

Ready to enhance your toolkit with Trend's exceptional products? Browse our collection above to find the perfect tools and supplies for your needs. If you require any assistance, don't hesitate to contact us for expert advice. Don't forget, trade accounts are available to help you manage your purchases more efficiently.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare
×

Trade Prices, Delivered

5% OFF

Join our trade mailing list and get 5% off your first order plus exclusive trade deals.

No thanks, I'll pay full price

You're In!

Check your email for your discount code.
Use code: TRADE5