Shop All Trend

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with.The guide bearing follows the vertical edge or template. ...

These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bear...

Replacement inner plate for T9, T11 and T14 routers

Replacement headcover and face seal for the AIR/PRO.

This set incorporates two drill countersinks and matching plug cutters. Plugs cutters are made from Tool Steel and are very slightly tapered. Use o...

These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

Replacement insert ring 68mm ID for CRT/MK3.

Use drill next to walls. Drill and fixes in tight spaces. Outer sleeve rotates allowing secure positioning. Shaft swivels to 15 degree angle....

High-quality, hook & loop nylon pad saver. Extends the life of the sander backing pad by providing a sacrificial barrier between the sander and...

Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid cu...

Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with.The guide bearing follows the vertical edge or template. ...

Replacement Bottom Plate Calibration Frame for T18S/CS165

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood ...

Trend Yeti CNC SmartBench SC2 V2 230V/240V Spindle Motor for all SmartBench Pro + and Pro X variants Not compatible with V1.1 AMB Machines. Digita...

The two bearings supplied offer the means of cutting different depths of mouldings.

Trend High Carbon Steel Countersink for 8mm drills - 16mm diameter The ideal countersink for use with your own 8mm diameter drill bit on hard and s...

Replacement T1 motor end cover.

A range of tungsten carbide tipped saw blades for cutting laminated and resin-based materials. For use in circular, plunge and table saws, Trend La...

High-performance, multi-material abrasives suitable for wood, paint, plastic, filler, plaster and metal. Available in 40, 60, 80, 120, 150, 180 and...

Trend Craft Pro 1/4in shank Intumescent strip cutter - 15mm width Two Flute Carbide tips. Cuts the perfect sized slot into door edges and door fram...

A range of thin kerf tungsten carbide tipped blades for cross-cutting wood and wood-based materials using cordless Mitre saws. Ideal for timber ski...

A range of thin kerf tungsten carbide tipped blades for cross-cutting wood and wood-based materials using cordless Mitre saws. Ideal for timber ski...