Power Tool Accessories

Simple to use Sharpener Guide for consistent edges on Chisels and plane irons Four Honing Angles 25°, 27.5°, 30° & 32.5° for increased honing a...

Trend Craft Pro 1/4in shank straight router cutter - 5/16in diameter Two Flute Carbide tips Two flute carbide TCT tips for cleaner cutting edges a...

Replacement Dust Shoe Z Head PCB REV B for the Trend Yeti CNC SmartBenchCompatible with SmartBench Machines with standard Dust Shoe.

A range of tungsten carbide tipped blades for cross-cutting wood and wood-based materials using Mitre and Radial Arm saws. Ideal for timber skirtin...

Side profile for an attractive handrail. Can be used in conjunction with C191. to produce the handrail top.

The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, c...

Profiler with shank mounted bearing guides. For use with router mounted above or below a table when following a template. For profiling and rebat...

Craft Pro 30mm to 20mm reducing bush - for saw blades 1.5mm thick 30mm outside diameter reducing washer with 20mm internal bore. Allows 30mm bore ...

A range of thin kerf tungsten carbide tipped combination blades for wood and wood-based materials. For use in cordless circular, plunge and table s...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges.

A replacement interrupt switch for your upper beamCompatible with all Trend Yeti CNC SmartBench variants.

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood ...

High-performance, multi-material abrasives suitable for wood, paint, plastic, filler, plaster and metal. Available in 40, 60, 80, 120, 150, 180 and...

Comprises three sets of cams, bolts & fixings. For Trend T8, T11 and T14 routers only. Design Reg. No. 000336763.

Trend Craft Pro 1/4in shank Intumescent strip cutter - 15mm width Two Flute Carbide tips. Cuts the perfect sized slot into door edges and door fram...

Replacement mitre fence body for CRT/MK3.

A range of tungsten carbide tipped blades for wood and wood-based materials. For use in circular, plunge and table saws, and available in a range o...

Replacement sealing patch T33 extractor

Simple to use Sharpener Guide for consistent edges on Chisels and plane irons Four Honing Angles 25°, 27.5°, 30° & 32.5° for increased honing a...

To suit user preference, the table shows angles from the horizontal and the profiles show angles from the vertical.

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges.

Replacement top middle extrusion for the PRT.

Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to f...

Classic skirting board mould.