Power Tool Accessories

A range of tungsten carbide tipped saw blades for cutting Plastic, Aluminium, Copper and other non-ferrous metals and alloys. For use in circular, ...

Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid cu...

Replacement outside locking flange for T18S/AG115.

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut.

Designed for sash bar window construction.

High-performance, multi-material abrasives suitable for wood, paint, plastic, filler, plaster and metal. Available in 40, 60, 80, 120, 150, 180 and...

High-performance, multi-material abrasives suitable for wood, paint, plastic, filler, plaster and metal. Available in 40, 60, 80, 120, 150, 180 and...

Replacement on/off dial T35.

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges.

Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid cu...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

To produce an undercut on relief lettering to create a more aesthetic appearance, as well as for edge grooving.

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

A range of thin kerf tungsten carbide tipped combination blades for wood and wood-based materials. For use in cordless circular, plunge and table s...

Especially designed for routing Corian, and similar luxury 'marble like' material which is used in many bathrooms and kitchens.

An initial cut with a straight cutter is required to produce the drawer pull profile. 1/2" shank 45mm diameter drawer pull twin flute TCT cutter. M...

A precision double-sided diamond bench stone 6 inches x 2 inches. Complete with cleaning block and non slip mat. Ex-fine 1000 grit (15 micron) and...

Replacement Phenolic Base Plate for T8 Router

A range of tungsten carbide tipped blades for cross-cutting wood and wood-based materials using Mitre and Radial Arm saws. Ideal for timber skirtin...

Replacement upper template only for the H/JIG/A.Extrusion only, no blocks or fixings included.

Trend Craft Pro 1/4in shank straight router cutter - 10mm diameter Two Flute Carbide tips Two flute carbide TCT tips for cleaner cutting edges and...

Some Ovolo cutters can be used with radius cutters, to make rule joints.

Replacement switch for the T4EK router.Only for use with PCB ref. WP-T4E/2/007.

Replacement base for the T5 V2