Power Tool Accessories > Routing

Cutter are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Ma...

These staff bead are ideal for producing nosings and attractive edges. Edge cut only.

Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural t...

Ideal for newel posts and caps for stairs. Supplied with one bearing.

Depth stop for the T10 router.

An initial cut with a straight cutter is required to produce the drawer pull profile.

These countersinks are produced in High Speed Steel (HSS) and should not be confused with carbon steel types. They are designed for countersinkin...

Male knob.

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a rou...

Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges. Corners will require final trimm...

This double ribbed ovolo style is an alternative to the rounding over cutter. If the cutter is lowered, a top quirk can be produced.

Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters.

Replacement ball bearing for the T1.

This two wing self-guiding Tungsten Carbide Tipped slotting cutter is ideal for biscuit jointing. The set is supplied with three ball bearing guide...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

Accessory template for the LOCK/JIG.

With bearing guided ogees, change profile by using a larger bearing and vary the depth.

Replacement mortise templates, as supplied with LOCK/JIG/C

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood ...

Heat treated tool steel countersinks with a HSS drill. Adjustable for different length screws and can produce a 9.5mm (3/8 inch) diameter or 12.7...

Replacement mortise pillar for the CRB.

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will...