Power Tool Accessories > Routing

Replacement rugged wheels for T32 and T33 extractors

Replacement nosepiece for the Stair casing jigs.

Replacement complete sub-base for the Stair casing jigs.

Replacement ball for the T5.

Replacement spring for the T5.

FTS/KIT MK1 Retro fit tune up kit Non slip mat reduces movement between FTS and worksurface Centering clip to position chisels and narrower blades ...

Pack of four interlocking gripping blocks that lock together to allow workpiece to be held in place when sanding, drilling and finishing. No need t...

The two part Contractor Hinge Jig is a portable fully adjustable block template set designed for recessing hinges in wooden doors & frames usin...

The two part Contractor Hinge Jig is a portable template set designed for recessing hinges in wooden doors & frames using a plunge router. It i...

Five piece cutter pack aimed at kitchen fitters. Pack includes 1/2 inch diameter x 50mm cut length worktop cutters with TC centre tip. Gives a clea...

Made from reinforced plastic with lift and lock ratchet system, with a steel tapped insert.

To suit user preference, the table shows angles from the horizontal and the profiles show angles from the vertical.

Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural t...

Three piece cutter pack with three connecting bolts and ten biscuits aimed at kitchen fitters. Pack includes one 1/2 inch diameter x 50mm cut lengt...

Three piece cutter pack with three connecting bolts and ten biscuits aimed at kitchen fitters. Pack includes one 1/2 inch diameter x 50mm cut lengt...

Made from reinforced plastic with lift and lock ratchet system, with a steel studding.

Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin buil...

3 degree undercut router bit with shank mounted bearing guide for routing a leading edge on doors to allow a tight fit against jamb.

Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees.

Trend Craft Pro 1/2in shank Intumescent strip cutter - 10mm width Two Flute Carbide tips. Cuts the perfect sized slot into door edges and door fram...

Trend Craft Pro 1/2in shank Aquamac cutter - 46.3mm diameter Two Flute Carbide tips. Speeds up the fitting of specialist weather seals Schlegel Aqu...

Recessing cutter will accommodate the Schlegel Aquamac 63 or Exitex Aquatex P6 weather strip system and allows for a particularly small gap between...

Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin buil...

Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin buil...