Skip to content
About Us – Northants Trade Contact Information Advice & Guides
Trade Prices. Maximum Choice.
Trade Prices. Maximum Choice.

Power Tool Accessories > Routing

Sold out
£60.37 - £60.37
£60.37
£60.37 - £60.37
£60.37

46/95X1/4TC - Guided profiler 12.7mm dia x 25.4mm

Trend
Out of stock

Trend Professional 1/4in shank bearing guided trimming cutter - 12.7mm diameter for laminate and template work 12.7mm diameter X 25.4mm cutting dep...

View full details
£60.37 - £60.37
£60.37
£60.37 - £60.37
£60.37
Sold out
Sold out
£29.36 - £29.36
£29.36
£29.36 - £29.36
£29.36

SNAP/CB/2TC - Trend Snappy TC Counterbore 4.75mm x 9.5mm

Trend
Out of stock

Counterbore with a slow spiral drill fitted. Tungsten Carbide Tipped for use in abrasive materials.

£29.36 - £29.36
£29.36
£29.36 - £29.36
£29.36
Sold out
Sold out
£147.32 - £147.32
£147.32
£147.32 - £147.32
£147.32

18/90X1/2TC - Vertical panel bevel cutter

Trend
Out of stock

Shape similar to Ref. 18/80. Suitable panel mould for use with Ref. PSC/5 & PSC/50.

£147.32 - £147.32
£147.32
£147.32 - £147.32
£147.32
Sold out
Sold out
£29.14 - £29.14
£29.14
£29.14 - £29.14
£29.14

C041AX1/4TC - Dovetail cutter angle=104 degrees 12.7mm diameter

Trend
Out of stock

These dovetail cutters produce a tight reliable joint for drawers, boxes etc. Refs. C154 & C041A can be used with Trend CDJ300, CDJ600 & ...

View full details
£29.14 - £29.14
£29.14
£29.14 - £29.14
£29.14
Sold out
Sold out
£70.38 - £70.38
£70.38
£70.38 - £70.38
£70.38

4/26X1/2TC - Two flute cutter 15.9mm diameter

Trend
Out of stock

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

View full details
£70.38 - £70.38
£70.38
£70.38 - £70.38
£70.38
Sold out
Sold out
£19.67 - £19.67
£19.67
£19.67 - £19.67
£19.67

SNAP/CSK/1 - Trend Snappy 82 degree Countersink Tool Steel

Trend
Out of stock

Trend Snappy Countersink - 82 degree included angle Made from tool steel with an 82degree pitch, the countersink is an affordable, quality solution...

View full details
£19.67 - £19.67
£19.67
£19.67 - £19.67
£19.67
Sold out
Sold out
£85.13 - £85.13
£85.13
£85.13 - £85.13
£85.13

35/3X3/8TC - T Slotter

Trend
Out of stock

A range of heavy duty 'T' slot cutters for clamping and hanging applications.Relief cut required.

£85.13 - £85.13
£85.13
£85.13 - £85.13
£85.13
Sold out
Sold out
£44.65 - £44.65
£44.65
£44.65 - £44.65
£44.65

47/7X1/4TC - Combi trimmer cutter 12.7mm diameter C1=9 C2=4mm length

Trend
Out of stock

For trimming top & lip. Economical cutters, perform 3 functions: 1. To top trim the overlay at 90 degrees. 2. To trim the overlay at 45 degre...

View full details
£44.65 - £44.65
£44.65
£44.65 - £44.65
£44.65
Sold out
Sold out
£72.70 - £72.70
£72.70
£72.70 - £72.70
£72.70

10H/1X1/4TC - Pin guided chamfer bevel cutter 45 degrees

Trend
Out of stock

Ideal for fast chamfering. Popular in the sign making trades. For chamfering edges of plastic material.

£72.70 - £72.70
£72.70
£72.70 - £72.70
£72.70
Sold out
Sold out
£56.98 - £56.98
£56.98
£56.98 - £56.98
£56.98

12/4X1/4TC - Radius cutter 4mm radius

Trend
Out of stock

For coves and part of a rule joint.

£56.98 - £56.98
£56.98
£56.98 - £56.98
£56.98
Sold out
Sold out
£22.34 - £22.34
£22.34
£22.34 - £22.34
£22.34

C015X1/2TC - Two Flute Cutter 9.5mm diameter

Trend
Out of stock

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood ...

View full details
£22.34 - £22.34
£22.34
£22.34 - £22.34
£22.34
Sold out
Sold out
£59.30 - £59.30
£59.30
£59.30 - £59.30
£59.30

C061X1/4TC - Self guided radius 7.9mm

Trend
Out of stock

Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with.The guide bearing follows the vertical edge or template. ...

View full details
£59.30 - £59.30
£59.30
£59.30 - £59.30
£59.30
Sold out
Sold out
£153.31 - £153.31
£153.31
£153.31 - £153.31
£153.31

C079CX1/2TC - Bearing guided round over ovolo 31.8mm radius

Trend
Out of stock

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a ro...

View full details
£153.31 - £153.31
£153.31
£153.31 - £153.31
£153.31
Sold out
Sold out
£70.38 - £70.38
£70.38
£70.38 - £70.38
£70.38

4/26X1/4TC - Two flute cutter 15.9mm diameter

Trend
Out of stock

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

View full details
£70.38 - £70.38
£70.38
£70.38 - £70.38
£70.38
Sold out
Sold out
£44.65 - £44.65
£44.65
£44.65 - £44.65
£44.65

C025CX1/2TC - Two Flute Cutter 15.9mm diameter

Trend
Out of stock

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood ...

View full details
£44.65 - £44.65
£44.65
£44.65 - £44.65
£44.65
Sold out
Sold out
£9.05 - £9.05
£9.05
£9.05 - £9.05
£9.05

WP-T12/072 - Right Handle for the T12 & T14 routers

Trend
Out of stock

Right Handle for the T12 & T14 routers

£9.05 - £9.05
£9.05
£9.05 - £9.05
£9.05
Sold out
Sold out
£47.21 - £47.21
£47.21
£47.21 - £47.21
£47.21

C306X1/2TC - Trend CraftPro 1/2" TCT 2.5mm Radius Flat Draining Groove Router Cutter, 16mm x 20mm

Trend
Out of stock

A gently radiused, flat-bottomed cutter for producing sleek modern draining grooves with effective water disposal. Especially suited to compact lam...

View full details
£47.21 - £47.21
£47.21
£47.21 - £47.21
£47.21
Sold out
Sold out
£5.06 - £5.06
£5.06
£5.06 - £5.06
£5.06

WP-T32/002 - Switch cover for T32

Trend
Out of stock

Replacement switch cover for T32 extractor

£5.06 - £5.06
£5.06
£5.06 - £5.06
£5.06
Sold out
Sold out
£19.18 - £19.18
£19.18
£19.18 - £19.18
£19.18

WP-T33L/047 - Socket for the T33A UK 115V

Trend
Out of stock

Replacement 115V socket for T33 extractor UK only

£19.18 - £19.18
£19.18
£19.18 - £19.18
£19.18
Sold out
Sold out
£24.34 - £24.34
£24.34
£24.34 - £24.34
£24.34

WP-T18/AG046 - Handle Assembly T18S/AG115

Trend
Out of stock

Replacement handle assembly for T18S/AG115.

£24.34 - £24.34
£24.34
£24.34 - £24.34
£24.34
Sold out
Sold out
£18.02 - £18.02
£18.02
£18.02 - £18.02
£18.02

WP-T10/054 - Slider for depth stop nut T10

Trend
Out of stock

Slider for depth stop nut for the T10 router.

£18.02 - £18.02
£18.02
£18.02 - £18.02
£18.02
Sold out
Sold out
£12.83 - £12.83
£12.83
£12.83 - £12.83
£12.83

WP-T10/045 - Knurled nut outer T10

Trend
Out of stock

Replacement knurled nut outer for the T10 router.

£12.83 - £12.83
£12.83
£12.83 - £12.83
£12.83
Sold out
Sold out
£23.56 - £23.56
£23.56
£23.56 - £23.56
£23.56

WP-T32/043 - Extension poles for the T32 and T33

Trend
Out of stock

Replacement extension poles for the T32 and T33 extractors

£23.56 - £23.56
£23.56
£23.56 - £23.56
£23.56
Sold out
Sold out
£3.52 - £3.52
£3.52
£3.52 - £3.52
£3.52

WP-T32/049 - Hose fitting for the T32 and T33

Trend
Out of stock

Replacement hose fitting for T32 and T33 extractors

£3.52 - £3.52
£3.52
£3.52 - £3.52
£3.52
Sold out

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare
×

Trade Prices, Delivered

5% OFF

Join our trade mailing list and get 5% off your first order plus exclusive trade deals.

No thanks, I'll pay full price

You're In!

Check your email for your discount code.
Use code: TRADE5