Power Tool Accessories > Routing

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

Purpose made for stair housing jigs. Ensures tight fit of tread in string.

Replacement revolving guide for the T5 V2

These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bear...

Some Ovolo cutters can be used with radius cutters, to make rule joints.

Tungsetn Carbide Tipped 2.0mm micro-granular tips for extra-long cutter life. Highly Ground Tip Face polished to 800-grit ensures accurate cutting...

For veining, panelling, 'V' grooving, bevelling & chamfering.

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood ...

Tungsten Carbide Tipped. Two flute cutter with a positive shear angle (down-cut) for fast cutting and fine finish. Ideal for grooving & trimmin...

Bearing guided intumescent strip cutter for routing the groove for intumescent strip in a frame or door. Two sizes available to suit 4mm thick stri...

These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of...

Bushing washers supplied to reduce bore diameter for certain makes and models of saw. The bushing washers must be pressed or glued into blade bod...

Roughing cutter which leaves an overhang of 3mm, for secondary final trimming.Life can be extended by varying height of cutter.

Trend Professional 1/4in shank bearing guided trimming cutter - 9.5mm diameter for laminate and template work 9.5mm diameter X 12.7mm cutting depth...

Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters.

Trend Snappy 35mm Drill - With Depth Stop The perfect accessory for drilling consistent 35mm diameter holes for circular hinges in kitchen and cabi...

Trend Snappy 35mm Drill - For Euro Hinges The perfect accessory for drilling consistent 35mm diameter holes for circular hinges in kitchen and cabi...

Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural t...

Accessory template for the LOCK/JIG.

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

Wide combination moulds for edging table tops and shelves.

For window boards 25mm thick. Two passes create shallow nosing.

A keyhole recess for picture hanging flush to the wall. Ref. 35/01 - No.10 & No.12 screw heads. Not suitable for grooving applications.