Skip to content
About Us – Northants Trade Contact Information Advice & Guides
Trade Prices. Maximum Choice.
Trade Prices. Maximum Choice.

Power Tool Accessories > Routing

Sold out
£131.81 - £131.81
£131.81
£131.81 - £131.81
£131.81

46/104X1/2TC - Bevel cutter

Trend
Out of stock

Useful for bevelling thick timbers. Certain sizes can be used for jointing, boxes, pilasters and carcassing. For full bevels, template should ...

View full details
£131.81 - £131.81
£131.81
£131.81 - £131.81
£131.81
Sold out
Sold out
£81.64 - £81.64
£81.64
£81.64 - £81.64
£81.64

12/6X1/4TC - Radius cutter 6.3mm radius

Trend
Out of stock

For coves and part of a rule joint.

£81.64 - £81.64
£81.64
£81.64 - £81.64
£81.64
Sold out
Sold out
£45.91 - £45.91
£45.91
£45.91 - £45.91
£45.91

C056X8MMTC - Radius 9.5mm radius x 19.1mm diameter

Trend
Out of stock

These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of...

View full details
£45.91 - £45.91
£45.91
£45.91 - £45.91
£45.91
Sold out
Sold out
£42.53 - £42.53
£42.53
£42.53 - £42.53
£42.53

5/1X1/4TC - Hinge recess cutter

Trend
Out of stock

Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges. Corners will require final trimm...

View full details
£42.53 - £42.53
£42.53
£42.53 - £42.53
£42.53
Sold out
Sold out
£5.05 - £5.05
£5.05
£5.05 - £5.05
£5.05

WP-T18/R14075 - Thumb Screw T18S/R14

Trend
Out of stock

Replacement Thumb Screw for T18S/R14.

£5.05 - £5.05
£5.05
£5.05 - £5.05
£5.05
Sold out
Sold out
£33.59 - £33.59
£33.59
£33.59 - £33.59
£33.59

C054X8MMTC - Radius 6.3mm radius x 12.7mm diameter

Trend
Out of stock

These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of...

View full details
£33.59 - £33.59
£33.59
£33.59 - £33.59
£33.59
Sold out
Sold out
£38.05 - £38.05
£38.05
£38.05 - £38.05
£38.05

47/4X1/4TC - Pierce and trim cutter

Trend
Out of stock

Trend Professional 1/4in shank bearing guided pierce and trim cutter - 6.3mm diameter for laminate work 6.3mm diameter X 18mm cutting length pierce...

View full details
£38.05 - £38.05
£38.05
£38.05 - £38.05
£38.05
Sold out
Sold out
£56.98 - £56.98
£56.98
£56.98 - £56.98
£56.98

13/40X1/4TC - Panel mould cutter

Trend
Out of stock

Template thickness should be 5mm thicker than cut length of cutter.

£56.98 - £56.98
£56.98
£56.98 - £56.98
£56.98
Sold out
Sold out
£11.75 - £11.75
£11.75
£11.75 - £11.75
£11.75

WP-WRT/62 - Table top back fence extrusion WRT

Trend
Out of stock

Replacement table top back fence extrusion WRT.

£11.75 - £11.75
£11.75
£11.75 - £11.75
£11.75
Sold out
Sold out
£29.14 - £29.14
£29.14
£29.14 - £29.14
£29.14

C154X8MMTC - Dovetail 6.0mm diameter x 98 degrees two flute

Trend
Out of stock

These dovetail cutters produce a tight reliable joint for drawers, boxes etc. Refs. C154 & C041A can be used with Trend CDJ300, CDJ600 & ...

View full details
£29.14 - £29.14
£29.14
£29.14 - £29.14
£29.14
Sold out
Sold out
£10.39 - £10.39
£10.39
£10.39 - £10.39
£10.39

WP-T18/R14071 - Trim Base Plate T18S/R14

Trend
Out of stock

Replacement Trim Base Plate for T18S/R14.

£10.39 - £10.39
£10.39
£10.39 - £10.39
£10.39
Sold out
Sold out
£110.58 - £110.58
£110.58
£110.58 - £110.58
£110.58

46/101X1/2TC - Guided profiler 25.4mm dia x 45mm cut

Trend
Out of stock

Profiler with shank mounted bearing guides. For use with router mounted above or below a table when following a template. For profiling and rebat...

View full details
£110.58 - £110.58
£110.58
£110.58 - £110.58
£110.58
Sold out
Sold out
£19.18 - £19.18
£19.18
£19.18 - £19.18
£19.18

WP-T33/047 - Socket for the T33A UK 240V

Trend
Out of stock

Replacement 240V socket for T33 extractor UK only

£19.18 - £19.18
£19.18
£19.18 - £19.18
£19.18
Sold out
Sold out
£24.66 - £24.66
£24.66
£24.66 - £24.66
£24.66

C002AX1/4TC - Two Flute Cutter 4mm diameter

Trend
Out of stock

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood ...

View full details
£24.66 - £24.66
£24.66
£24.66 - £24.66
£24.66
Sold out
Sold out
£43.60 - £43.60
£43.60
£43.60 - £43.60
£43.60

T46/02X1/4TC - Trimming cutter 9.5mm diameter

Trend
Out of stock

Trend Professional 1/4in shank bearing guided trimming cutter - 9.5mm diameter for laminate and template work 9.5mm diameter X 25mm cutting length ...

View full details
£43.60 - £43.60
£43.60
£43.60 - £43.60
£43.60
Sold out
Sold out
£110.56 - £110.56
£110.56
£110.56 - £110.56
£110.56

WP-T11/087 - Parallel side fence complete T11 only

Trend
Out of stock

Replacement complete side fence for the T11. Can also be used with T9 router. The plastic sliding cheeks can be adjusted to reduce cutter aperture....

View full details
£110.56 - £110.56
£110.56
£110.56 - £110.56
£110.56
Sold out
Sold out
£163.10 - £163.10
£163.10
£163.10 - £163.10
£163.10

WP-PRT/10 - PRT No volt release switch 230V UK

Trend
Out of stock

Replacement no volt release switch for the PRT table.

£163.10 - £163.10
£163.10
£163.10 - £163.10
£163.10
Sold out
Sold out
£4.06 - £4.06
£4.06
£4.06 - £4.06
£4.06

WP-T7/004 - Indicator Ring T7

Trend
Out of stock

Replacement Indicator ring for the T7 router.

£4.06 - £4.06
£4.06
£4.06 - £4.06
£4.06
Sold out
Sold out
£6.92 - £6.92
£6.92
£6.92 - £6.92
£6.92

WP-CRTMK3/04 - Fence cheek CRT/MK3 - UK sale only

Trend
Out of stock

Replacement fence cheek for CRT/MK3.

£6.92 - £6.92
£6.92
£6.92 - £6.92
£6.92
Sold out
Sold out
£5.14 - £5.14
£5.14
£5.14 - £5.14
£5.14

WP-T10/095 - Machine screw countersink M5 x 10mm Ph T10

Trend
Out of stock

Machine screw for the T10 router.

£5.14 - £5.14
£5.14
£5.14 - £5.14
£5.14
Sold out
Sold out
£122.89 - £122.89
£122.89
£122.89 - £122.89
£122.89

9/75X1/4TC - Bearing guided multi-reed cutter

Trend
Out of stock

Ideal for shelves. Edge moulding applications only.

£122.89 - £122.89
£122.89
£122.89 - £122.89
£122.89
Sold out
Sold out
£6.00 - £6.00
£6.00
£6.00 - £6.00
£6.00

WP-CNCY/083 - Replacement Spacer Y Bench Pack of 2 for the SmartBench

Trend
Out of stock

Spacer Y Bench Pack of 2 for the Trend Yeti CNC SmartBenchCompatible with SmartBench variants.

£6.00 - £6.00
£6.00
£6.00 - £6.00
£6.00
Sold out
Sold out
£74.84 - £74.84
£74.84
£74.84 - £74.84
£74.84

21/1X1/4TC - Guide housing cutter

Trend
Out of stock

Template thickness should be 5mm thicker than cut length of cutter. Can be used to rout both tenons and housings.

£74.84 - £74.84
£74.84
£74.84 - £74.84
£74.84
Sold out
Sold out
£107.15 - £107.15
£107.15
£107.15 - £107.15
£107.15

9/10X1/4TC - Staff bead nosing

Trend
Out of stock

Ideal for producing nosings and attractive edge moulds.Beads Ref. 9/10 has a matching cutter Ref. 8/10 for jointing & hinging.

£107.15 - £107.15
£107.15
£107.15 - £107.15
£107.15
Sold out

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare
×

Trade Prices, Delivered

5% OFF

Join our trade mailing list and get 5% off your first order plus exclusive trade deals.

No thanks, I'll pay full price

You're In!

Check your email for your discount code.
Use code: TRADE5