Skip to content
About Us – Northants Trade Contact Information Advice & Guides
Trade Prices. Maximum Choice.
Trade Prices. Maximum Choice.

Power Tool Accessories > Routing

Sold out
£41.42 - £41.42
£41.42
£41.42 - £41.42
£41.42

6200/8TC - Adjustable countersink 5/8 inch diameter

Trend
Out of stock

They are designed to drill and coutersink simultaneously, a wide variety of materials. Supplied with a HSS slow spiral drill bit. Fully adjusta...

View full details
£41.42 - £41.42
£41.42
£41.42 - £41.42
£41.42
Sold out
Sold out
£10.39 - £10.39
£10.39
£10.39 - £10.39
£10.39

WP-T18/R14111 - Centring Pin Assembly T18S/R14

Trend
Out of stock

Replacement Centring Pin Assembly for T18S/R14Cone can be used on a guide bush from 16mm to 40mm OD.

£10.39 - £10.39
£10.39
£10.39 - £10.39
£10.39
Sold out
Sold out
£172.48 - £172.48
£172.48
£172.48 - £172.48
£172.48

WP-T18/R14115 - Motor Assembly T18S/R14

Trend
Out of stock

Replacement Motor Assembly for T18S/R14

£172.48 - £172.48
£172.48
£172.48 - £172.48
£172.48
Sold out
Sold out
£53.57 - £53.57
£53.57
£53.57 - £53.57
£53.57

4/60X1/4TC - Two flute cutter 22mm diameter

Trend
Out of stock

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

View full details
£53.57 - £53.57
£53.57
£53.57 - £53.57
£53.57
Sold out
Sold out
£13.54 - £13.54
£13.54
£13.54 - £13.54
£13.54

WP-T4/003 - Base T4

Trend
Out of stock

Spare base for the T4 router.

£13.54 - £13.54
£13.54
£13.54 - £13.54
£13.54
Sold out
Sold out
£45.91 - £45.91
£45.91
£45.91 - £45.91
£45.91

46/910X1/4TC - Guided profiler 12.7mm dia x 4mm cut

Trend
Out of stock

Profiler with shank mounted bearing guides. For use with router mounted above or below a table when following a template. For profiling and rebat...

View full details
£45.91 - £45.91
£45.91
£45.91 - £45.91
£45.91
Sold out
Sold out
£1.27 - £1.27
£1.27
£1.27 - £1.27
£1.27

WP-SCW/48 - M4 x 10mm countersunk slot machine screw - UK only

Trend
Out of stock

Machine countersink screw.

£1.27 - £1.27
£1.27
£1.27 - £1.27
£1.27
Sold out
Sold out
£65.92 - £65.92
£65.92
£65.92 - £65.92
£65.92

C140X1/4TC - Corner bead 3.2mm radius

Trend
Out of stock

Attractive edge moulds.A full corner bead can be produced by making a second pass at 90 degrees.

£65.92 - £65.92
£65.92
£65.92 - £65.92
£65.92
Sold out
Sold out
£131.81 - £131.81
£131.81
£131.81 - £131.81
£131.81

46/38X1/2TC - Bearing guided chamfer cutter 45 degrees

Trend
Out of stock

Ideal for newel posts and caps for stairs. Supplied with one bearing.

£131.81 - £131.81
£131.81
£131.81 - £131.81
£131.81
Sold out
Sold out
£30.17 - £30.17
£30.17
£30.17 - £30.17
£30.17

C115X1/4TC - Self guided trimmer 9.5mm diameter

Trend
Out of stock

Used for trimming plastic or plywood overlays.Also for copy profiling with a template.

£30.17 - £30.17
£30.17
£30.17 - £30.17
£30.17
Sold out
Sold out
£39.10 - £39.10
£39.10
£39.10 - £39.10
£39.10

C143X1/4TC - Slotting 3.2mm cut

Trend
Out of stock

These two wing Tungsten Carbide Tipped slotting cutters are ideal for grooving and rebating operations. A 12.7mm diameter bearing is supplied with...

View full details
£39.10 - £39.10
£39.10
£39.10 - £39.10
£39.10
Sold out
Sold out
£67.62 - £67.62
£67.62
£67.62 - £67.62
£67.62

3/73DMX1/2TC - Two flute 12mm dia x 50mm cut x84mm

Trend
Out of stock

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

View full details
£67.62 - £67.62
£67.62
£67.62 - £67.62
£67.62
Sold out
Sold out
£43.60 - £43.60
£43.60
£43.60 - £43.60
£43.60

C179X12MMTC - Dovetail 19.1mm x 97 degrees x 25mm cut

Trend
Out of stock

These cutters are for Trend Craft Dovetail Jigs.

£43.60 - £43.60
£43.60
£43.60 - £43.60
£43.60
Sold out
Sold out
£28.06 - £28.06
£28.06
£28.06 - £28.06
£28.06

C041X1/4TC - Dovetail cutter angle=104 degrees x 12.7mm diameter

Trend
Out of stock

These dovetail cutters produce a tight reliable joint for drawers, boxes etc. To suit user preference, the table shows angles from the horizontal ...

View full details
£28.06 - £28.06
£28.06
£28.06 - £28.06
£28.06
Sold out
Sold out
£38.26 - £38.26
£38.26
£38.26 - £38.26
£38.26

C030CX1/2TC - Two Flute Cutter 20.0mm diameter

Trend
Out of stock

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood ...

View full details
£38.26 - £38.26
£38.26
£38.26 - £38.26
£38.26
Sold out
Sold out
£22.98 - £22.98
£22.98
£22.98 - £22.98
£22.98

WP-HJ/B/05 - Edge guide complete H/JIG/B

Trend
Out of stock

Edge guide complete for H/JIG/B.

£22.98 - £22.98
£22.98
£22.98 - £22.98
£22.98
Sold out
Sold out
£95.68 - £95.68
£95.68
£95.68 - £95.68
£95.68

C033VX1/2TC - Two Flute Cutter 47.6mm diameter

Trend
Out of stock

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood ...

View full details
£95.68 - £95.68
£95.68
£95.68 - £95.68
£95.68
Sold out
Sold out
£17.84 - £17.84
£17.84
£17.84 - £17.84
£17.84

C037X1/4TC - One Flute 6.3mm diameter x 12.7mm cut

Trend
Out of stock

Single fluted Tungsten Carbide straight cutter for fast free cutting. Single flutes should be chosen where speed and clearance rates are more imp...

View full details
£17.84 - £17.84
£17.84
£17.84 - £17.84
£17.84
Sold out
Sold out
£2.36 - £2.36
£2.36
£2.36 - £2.36
£2.36

WP-T4/038 - Thumb knob T4

Trend
Out of stock

The thumb knob for the T4 router.

£2.36 - £2.36
£2.36
£2.36 - £2.36
£2.36
Sold out
Sold out
£2.44 - £2.44
£2.44
£2.44 - £2.44
£2.44

WP-T7/138 - Trammel Pin for T7 & T8

Trend
Out of stock

Replacement Trammel Pin for T7 & T8 routers

£2.44 - £2.44
£2.44
£2.44 - £2.44
£2.44
Sold out
Sold out
£93.76 - £93.76
£93.76
£93.76 - £93.76
£93.76

4/30X1/2TC - Two flute cutter 18mm diameter

Trend
Out of stock

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

View full details
£93.76 - £93.76
£93.76
£93.76 - £93.76
£93.76
Sold out
Sold out
£52.49 - £52.49
£52.49
£52.49 - £52.49
£52.49

3/76X1/4TC - Two flute cutter 12.55mm diameter

Trend
Out of stock

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

View full details
£52.49 - £52.49
£52.49
£52.49 - £52.49
£52.49
Sold out
Sold out
£6.61 - £6.61
£6.61
£6.61 - £6.61
£6.61

WP-T31/021 - Hose handle with air control valve T31

Trend
Out of stock

Replacement hose handle with air control valve T31.

£6.61 - £6.61
£6.61
£6.61 - £6.61
£6.61
Sold out
Sold out
£1.27 - £1.27
£1.27
£1.27 - £1.27
£1.27

WP-T4/062 - O ring revolving guide T4

Trend
Out of stock

The revolving guide 'o' ring for the T4 router turret stop.

£1.27 - £1.27
£1.27
£1.27 - £1.27
£1.27
Sold out

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare
×

Trade Prices, Delivered

5% OFF

Join our trade mailing list and get 5% off your first order plus exclusive trade deals.

No thanks, I'll pay full price

You're In!

Check your email for your discount code.
Use code: TRADE5