Skip to content
About Us – Northants Trade Contact Information Advice & Guides
Trade Prices. Maximum Choice.
Trade Prices. Maximum Choice.

Power Tool Accessories > Routing

Sold out
£45.59 - £45.59
£45.59
£45.59 - £45.59
£45.59

11/32X1/2TC - Chamfer V groove cutter 45 degrees

Trend
Out of stock

Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose.

£45.59 - £45.59
£45.59
£45.59 - £45.59
£45.59
Sold out
Sold out
£21.24 - £21.24
£21.24
£21.24 - £21.24
£21.24

C012X1/2TC - Two Flute Cutter 7.9mm diameter

Trend
Out of stock

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood ...

View full details
£21.24 - £21.24
£21.24
£21.24 - £21.24
£21.24
Sold out
Sold out
£75.94 - £75.94
£75.94
£75.94 - £75.94
£75.94

4/62X1/4TC - Two flute cutter 21mm diameter

Trend
Out of stock

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

View full details
£75.94 - £75.94
£75.94
£75.94 - £75.94
£75.94
Sold out
Sold out
£153.31 - £153.31
£153.31
£153.31 - £153.31
£153.31

46/67X1/2TC - Bearing guided ogee cutter

Trend
Out of stock

Supplied with two bearings. The larger bearing removes the bottom quirk.

£153.31 - £153.31
£153.31
£153.31 - £153.31
£153.31
Sold out
Sold out
£44.65 - £44.65
£44.65
£44.65 - £44.65
£44.65

C148X1/4TC - Slotting 10mm cut

Trend
Out of stock

These two wing Tungsten Carbide Tipped slotting cutters are ideal for grooving and rebating operations. A 12.7mm diameter bearing is supplied with...

View full details
£44.65 - £44.65
£44.65
£44.65 - £44.65
£44.65
Sold out
Sold out
£95.00 - £95.00
£95.00
£95.00 - £95.00
£95.00

14/2X1/2TC - Up-Down cutter

Trend
Out of stock

Tungsten Carbide Tipped. Two flute cutter with tips sheared up and down, giving a fine finish. For trimming veneered and double-faced boards, ply...

View full details
£95.00 - £95.00
£95.00
£95.00 - £95.00
£95.00
Sold out
Sold out
£108.42 - £108.42
£108.42
£108.42 - £108.42
£108.42

4/90X1/2TC - Two flute cutter 31.8mm diameter

Trend
Out of stock

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

View full details
£108.42 - £108.42
£108.42
£108.42 - £108.42
£108.42
Sold out
Sold out
£26.09 - £26.09
£26.09
£26.09 - £26.09
£26.09

C001FX1/4TC - Trend CraftPro 1/4in shank Two Flute Straight Router Cutter Bit 3.4mm dia x 11mm cut depth

Trend
Out of stock

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood ...

View full details
£26.09 - £26.09
£26.09
£26.09 - £26.09
£26.09
Sold out
Sold out
£44.65 - £44.65
£44.65
£44.65 - £44.65
£44.65

C074X8MMTC - Rounding over 3.2mm radius x 9.5mm cut

Trend
Out of stock

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a ro...

View full details
£44.65 - £44.65
£44.65
£44.65 - £44.65
£44.65
Sold out
Sold out
£21.24 - £21.24
£21.24
£21.24 - £21.24
£21.24

C008X1/2TC - Two Flute Cutter 6.3mm diameter

Trend
Out of stock

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood ...

View full details
£21.24 - £21.24
£21.24
£21.24 - £21.24
£21.24
Sold out
Sold out
£119.22 - £119.22
£119.22
£119.22 - £119.22
£119.22

84/83X1/2TC - Drawer pull cutter

Trend
Out of stock

The long cut depth of these cutters allows them to produce under-cut finger grooves.

£119.22 - £119.22
£119.22
£119.22 - £119.22
£119.22
Sold out
Sold out
£54.84 - £54.84
£54.84
£54.84 - £54.84
£54.84

3/81X1/4TC - Two flute cutter 12.7mm diameter

Trend
Out of stock

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

View full details
£54.84 - £54.84
£54.84
£54.84 - £54.84
£54.84
Sold out
Sold out
£121.81 - £121.81
£121.81
£121.81 - £121.81
£121.81

46/7/50X1/4TC - Bearing guided glazing bar cutter

Trend
Out of stock

The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded.

£121.81 - £121.81
£121.81
£121.81 - £121.81
£121.81
Sold out
Sold out
£24.66 - £24.66
£24.66
£24.66 - £24.66
£24.66

C002X1/2TC - Two Flute Cutter 4mm diameter

Trend
Out of stock

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood ...

View full details
£24.66 - £24.66
£24.66
£24.66 - £24.66
£24.66
Sold out
Sold out
£21.24 - £21.24
£21.24
£21.24 - £21.24
£21.24

C008X8MMTC - Two Flute Cutter 6.3mm diameter

Trend
Out of stock

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood ...

View full details
£21.24 - £21.24
£21.24
£21.24 - £21.24
£21.24
Sold out
Sold out
£170.35 - £170.35
£170.35
£170.35 - £170.35
£170.35

46/18X1/2TC - Bearing guided ovolo cutter 25.4mm radius

Trend
Out of stock

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a rou...

View full details
£170.35 - £170.35
£170.35
£170.35 - £170.35
£170.35
Sold out
Sold out
£68.08 - £68.08
£68.08
£68.08 - £68.08
£68.08

16/2X1/4TC - Ovolo panel veining cutter 4.8mm radius

Trend
Out of stock

A range of small sized panelling cutters. Ideal for veining and fluting applications.

£68.08 - £68.08
£68.08
£68.08 - £68.08
£68.08
Sold out
Sold out
£97.78 - £97.78
£97.78
£97.78 - £97.78
£97.78

C033WX1/2TC - Two Flute Cutter 50mm diameter

Trend
Out of stock

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood ...

View full details
£97.78 - £97.78
£97.78
£97.78 - £97.78
£97.78
Sold out
Sold out
£16.84 - £16.84
£16.84
£16.84 - £16.84
£16.84

C009X1/4TC - Two Flute Cutter 7.1mm diameter

Trend
Out of stock

Trend Craft Pro 1/4in shank straight router cutter - 9/32in diameter Two Flute Carbide tips Two flute carbide TCT tips for cleaner cutting edges a...

View full details
£16.84 - £16.84
£16.84
£16.84 - £16.84
£16.84
Sold out
Sold out
£15.36 - £15.36
£15.36
£15.36 - £15.36
£15.36

WP-LOCK/T/120 - Lock Template 16mm x 30mm faceplate

Trend
Out of stock

Accessory template for the LOCK/JIG.

£15.36 - £15.36
£15.36
£15.36 - £15.36
£15.36
Sold out
Sold out
£63.78 - £63.78
£63.78
£63.78 - £63.78
£63.78

3/73X1/2TC - Two flute cutter 12mm diameter

Trend
Out of stock

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

View full details
£63.78 - £63.78
£63.78
£63.78 - £63.78
£63.78
Sold out
Sold out
£27.54 - £27.54
£27.54
£27.54 - £27.54
£27.54

WP-MT/15 - Template long MT/JIG

Trend
Out of stock

Replacement long template for the MT/JIG.

£27.54 - £27.54
£27.54
£27.54 - £27.54
£27.54
Sold out
Sold out
£136.28 - £136.28
£136.28
£136.28 - £136.28
£136.28

34/50X1/2TC - Espagnolette cutter 16.3/12.3mm cut

Trend
Out of stock

Bearing guided tool to rout stepped groove for espagnolette lock recess.Two flute for clean finish.

£136.28 - £136.28
£136.28
£136.28 - £136.28
£136.28
Sold out
Sold out
£100.55 - £100.55
£100.55
£100.55 - £100.55
£100.55

10/2X1/2TC - Mortar Groove/Large chamfer 60 degrees

Trend
Out of stock

Use for producing mortar grooves and for bevelling applications.

£100.55 - £100.55
£100.55
£100.55 - £100.55
£100.55
Sold out

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare
×

Trade Prices, Delivered

5% OFF

Join our trade mailing list and get 5% off your first order plus exclusive trade deals.

No thanks, I'll pay full price

You're In!

Check your email for your discount code.
Use code: TRADE5