Power Tool Accessories > Routing > Router Bits

Cutter are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Ma...

These staff bead are ideal for producing nosings and attractive edges. Edge cut only.

Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural t...

Ideal for newel posts and caps for stairs. Supplied with one bearing.

An initial cut with a straight cutter is required to produce the drawer pull profile.

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a rou...

Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges. Corners will require final trimm...

This double ribbed ovolo style is an alternative to the rounding over cutter. If the cutter is lowered, a top quirk can be produced.

Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters.

With bearing guided ogees, change profile by using a larger bearing and vary the depth.

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood ...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will...

Purpose made for stair housing jigs. Ensures tight fit of tread in string.

Self guiding cavetto style cutter, which follow the board edges for straight or curved work radius.

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood ...

Trend Professional 1/4in shank bearing guided trimming cutter - 9.5mm diameter for laminate and template work 9.5mm diameter X 6.35mm cutting depth...

Popular rebate sets which include different size bearings for a choice of rebates. Ease of setting-up and accurate depth of cut. Ideal for rebating...

Single fluted Tungsten Carbide straight cutter for fast free cutting. Single flutes should be chosen where speed and clearance rates are more imp...

Can be used to make rule joints or glazing bar joints.

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges.

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood ...