Power Tool Accessories > Routing > Router Bits

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

Four fluted cutter for routing tenons with a clean finish on the shoulder. Tungsten Carbide Tipped for use on timber and abrasive man-made boards. ...

Recessing cutter for producing double rebates. For producing recesses with a lower rebate. Designed to accept library/bookcase strip.

Cut a wider edge line, at an angle of 45 degrees. A 16mm bearing is supplied as standard. A larger 19mm bearing will spread the wear of the cuttin...

Popular rebate sets which include different size bearings for a choice of rebates. Ease of setting-up and accurate depth of cut. Ideal for rebating...

Ideal for shelves. Edge moulding applications only.

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

Template thickness should be 5mm thicker than cut length of cutter. Can be used to rout both tenons and housings.

Creates a corner bead with a step. By making a second pass at 90 degrees a full corner bead can be cut. Two flutes give a clean finish to cut edg...

A bearing guided flat ovolo, giving an attractive edging effect.

A quarter ellipse cutter for architraves and hand rails. Can be used to form the top portion of handrail moulding when used in conjunction with Ref...

No 2 Robertson square drive bits.

These cutters are for Trend Craft Dovetail Jigs.

These cutters are self-guiding and can be used to produce rebates, lap joints, tongues and rebated corners. When using bearing Ref. B95A make two p...

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut.

Designed for sash bar window construction.

Some Ovolo cutters can be used with radius cutters, to make rule joints.

Scribing cutter to suit glazing bar ovolo. Designed for sash bar window construction.

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood ...

Trend Craft Pro 1/4in shank straight router cutter - 15mm diameter Two Flute Carbide tips Two flute carbide TCT tips for cleaner cutting edges and...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...