Skip to content
About Us – Northants Trade Contact Information Advice & Guides
Trade Prices. Maximum Choice.
Trade Prices. Maximum Choice.

Power Tool Accessories > Routing > Router Bits

Sold out
£45.91 - £45.91
£45.91
£45.91 - £45.91
£45.91

C056X8MMTC - Radius 9.5mm radius x 19.1mm diameter

Trend
Out of stock

These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of...

View full details
£45.91 - £45.91
£45.91
£45.91 - £45.91
£45.91
Sold out
Sold out
£42.53 - £42.53
£42.53
£42.53 - £42.53
£42.53

5/1X1/4TC - Hinge recess cutter

Trend
Out of stock

Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges. Corners will require final trimm...

View full details
£42.53 - £42.53
£42.53
£42.53 - £42.53
£42.53
Sold out
Sold out
£33.59 - £33.59
£33.59
£33.59 - £33.59
£33.59

C054X8MMTC - Radius 6.3mm radius x 12.7mm diameter

Trend
Out of stock

These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of...

View full details
£33.59 - £33.59
£33.59
£33.59 - £33.59
£33.59
Sold out
Sold out
£56.98 - £56.98
£56.98
£56.98 - £56.98
£56.98

13/40X1/4TC - Panel mould cutter

Trend
Out of stock

Template thickness should be 5mm thicker than cut length of cutter.

£56.98 - £56.98
£56.98
£56.98 - £56.98
£56.98
Sold out
Sold out
£38.05 - £38.05
£38.05
£38.05 - £38.05
£38.05

47/4X1/4TC - Pierce and trim cutter

Trend
Out of stock

Trend Professional 1/4in shank bearing guided pierce and trim cutter - 6.3mm diameter for laminate work 6.3mm diameter X 18mm cutting length pierce...

View full details
£38.05 - £38.05
£38.05
£38.05 - £38.05
£38.05
Sold out
Sold out
£29.14 - £29.14
£29.14
£29.14 - £29.14
£29.14

C154X8MMTC - Dovetail 6.0mm diameter x 98 degrees two flute

Trend
Out of stock

These dovetail cutters produce a tight reliable joint for drawers, boxes etc. Refs. C154 & C041A can be used with Trend CDJ300, CDJ600 & ...

View full details
£29.14 - £29.14
£29.14
£29.14 - £29.14
£29.14
Sold out
Sold out
£110.58 - £110.58
£110.58
£110.58 - £110.58
£110.58

46/101X1/2TC - Guided profiler 25.4mm dia x 45mm cut

Trend
Out of stock

Profiler with shank mounted bearing guides. For use with router mounted above or below a table when following a template. For profiling and rebat...

View full details
£110.58 - £110.58
£110.58
£110.58 - £110.58
£110.58
Sold out
Sold out
£24.66 - £24.66
£24.66
£24.66 - £24.66
£24.66

C002AX1/4TC - Two Flute Cutter 4mm diameter

Trend
Out of stock

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood ...

View full details
£24.66 - £24.66
£24.66
£24.66 - £24.66
£24.66
Sold out
Sold out
£43.60 - £43.60
£43.60
£43.60 - £43.60
£43.60

T46/02X1/4TC - Trimming cutter 9.5mm diameter

Trend
Out of stock

Trend Professional 1/4in shank bearing guided trimming cutter - 9.5mm diameter for laminate and template work 9.5mm diameter X 25mm cutting length ...

View full details
£43.60 - £43.60
£43.60
£43.60 - £43.60
£43.60
Sold out
Sold out
£122.89 - £122.89
£122.89
£122.89 - £122.89
£122.89

9/75X1/4TC - Bearing guided multi-reed cutter

Trend
Out of stock

Ideal for shelves. Edge moulding applications only.

£122.89 - £122.89
£122.89
£122.89 - £122.89
£122.89
Sold out
Sold out
£107.15 - £107.15
£107.15
£107.15 - £107.15
£107.15

9/10X1/4TC - Staff bead nosing

Trend
Out of stock

Ideal for producing nosings and attractive edge moulds.Beads Ref. 9/10 has a matching cutter Ref. 8/10 for jointing & hinging.

£107.15 - £107.15
£107.15
£107.15 - £107.15
£107.15
Sold out
Sold out
£74.84 - £74.84
£74.84
£74.84 - £74.84
£74.84

21/1X1/4TC - Guide housing cutter

Trend
Out of stock

Template thickness should be 5mm thicker than cut length of cutter. Can be used to rout both tenons and housings.

£74.84 - £74.84
£74.84
£74.84 - £74.84
£74.84
Sold out
Sold out
£31.27 - £31.27
£31.27
£31.27 - £31.27
£31.27

55/1X1/4HSS - Aluminium & plastic cutter 6.3mm diameter

Trend
Out of stock

Straight two flute for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or...

View full details
£31.27 - £31.27
£31.27
£31.27 - £31.27
£31.27
Sold out
Sold out
£48.04 - £48.04
£48.04
£48.04 - £48.04
£48.04

2/1X1/4TC - Single flute cutter 1.6mm diameter

Trend
Out of stock

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix ...

View full details
£48.04 - £48.04
£48.04
£48.04 - £48.04
£48.04
Sold out
Sold out
£83.72 - £83.72
£83.72
£83.72 - £83.72
£83.72

46/260X1/4TC - Bearing guided cove cutter 6.3mm radius

Trend
Out of stock

The two bearings supplied offer the means of cutting different depths of mouldings.

£83.72 - £83.72
£83.72
£83.72 - £83.72
£83.72
Sold out
Sold out
£124.98 - £124.98
£124.98
£124.98 - £124.98
£124.98

46/22X1/2TC - Trimming cutter 18.2mm diameter

Trend
Out of stock

Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to f...

View full details
£124.98 - £124.98
£124.98
£124.98 - £124.98
£124.98
Sold out
Sold out
£54.84 - £54.84
£54.84
£54.84 - £54.84
£54.84

C069X1/4TC - Staff bead 3.6mm radius

Trend
Out of stock

These staff bead are ideal for producing nosings and attractive edges. Edge cut only.

£54.84 - £54.84
£54.84
£54.84 - £54.84
£54.84
Sold out
Sold out
£63.78 - £63.78
£63.78
£63.78 - £63.78
£63.78

C078X1/2TC - Rounding over 9.5mm radius x 15.9mm cut

Trend
Out of stock

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a ro...

View full details
£63.78 - £63.78
£63.78
£63.78 - £63.78
£63.78
Sold out
Sold out
£33.59 - £33.59
£33.59
£33.59 - £33.59
£33.59

3/07X1/4TC - Two flute cutter 4mm diameter

Trend
Out of stock

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges.

£33.59 - £33.59
£33.59
£33.59 - £33.59
£33.59
Sold out
Sold out
£43.60 - £43.60
£43.60
£43.60 - £43.60
£43.60

3/45X1/4TC - Two flute cutter 8.9mm diameter

Trend
Out of stock

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges.

£43.60 - £43.60
£43.60
£43.60 - £43.60
£43.60
Sold out
Sold out
£39.10 - £39.10
£39.10
£39.10 - £39.10
£39.10

3/02X1/4TC - Two flute cutter 6.3mm diameter

Trend
Out of stock

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges.

£39.10 - £39.10
£39.10
£39.10 - £39.10
£39.10
Sold out
Sold out
£43.60 - £43.60
£43.60
£43.60 - £43.60
£43.60

3/4X1/4TC - Two flute cutter 8mm diameter

Trend
Out of stock

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges.

£43.60 - £43.60
£43.60
£43.60 - £43.60
£43.60
Sold out
Sold out
£61.45 - £61.45
£61.45
£61.45 - £61.45
£61.45

3/22X1/2TC - Two flute cutter 6.3mm diameter

Trend
Out of stock

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges.

£61.45 - £61.45
£61.45
£61.45 - £61.45
£61.45
Sold out
Sold out
£63.78 - £63.78
£63.78
£63.78 - £63.78
£63.78

7/1X1/4TC - Ovolo rounding over cutter 3mm radius

Trend
Out of stock

Some Ovolo cutters can be used with radius cutters, to make rule joints.

£63.78 - £63.78
£63.78
£63.78 - £63.78
£63.78
Sold out

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare
×

Trade Prices, Delivered

5% OFF

Join our trade mailing list and get 5% off your first order plus exclusive trade deals.

No thanks, I'll pay full price

You're In!

Check your email for your discount code.
Use code: TRADE5