Power Tool Accessories > Routing > Router Bits

Single fluted Tungsten Carbide straight cutter for fast free cutting. Single flutes should be chosen where speed and clearance rates are more imp...

For veining, panelling, 'V' grooving, bevelling & chamfering.

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

Two flute cutters for producing extra clean cut bevelled edges. No plunge cut.

Ideal for producing nosings and attractive edge moulds.Beads Ref. 9/11 has a matching cutter Ref. 8/11 for jointing & hinging.

Creates a corner bead with a step. By making a second pass at 90 degrees a full corner bead can be cut. Two flutes give a clean finish to cut edg...

Bearing guided for straight or curved work. For portable and stationary routers. Supplied as standard with Ref. BR/191 fitted and internal bearin...

Blades of cutters can be rotated through 180 degrees to give one new cutting edge.

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This type without scribers are for lamina...

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood ...

Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid cu...

For creating a concave radius or cove in the edge of furniture and columns.

Trend Craft Pro 1/4in shank recessing cutter - 20mm width Two Flute Carbide tips. Specialist cutter to cut double rebates for fitting Tonk strip bo...

Creates a corner bead with a step. By making a second pass at 90 degrees a full corner bead can be cut. Two flutes give a clean finish to cut edg...

Especially designed for routing Corian, and similar luxury 'marble like' material which is used in many bathrooms and kitchens. For bullnose mouldi...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

A range of cutters for producing different types of cornice. Chamfers can be routed using a 45 degree cutter eg. Ref. 46/38. These cutters can al...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

Single fluted Tungsten Carbide straight cutter for fast free cutting. Single flutes should be chosen where speed and clearance rates are more imp...

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood ...