Power Tool Accessories > Routing > Router Bits

Some Ovolo cutters can be used with radius cutters, to make rule joints.

High quality forged and ground Carbon Steel short Forstner bit for drilling accurate holes. For use with the Trend Snappy Quick Chuck. Clean, preci...

Trend Craft Pro 1/4in shank straight router cutter - 4mm diameter solid carbide insert Two flute solid carbide insert for increased strength, offer...

Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with.The guide bearing follows the vertical edge or template.

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

A two flute cutters with extra long shanks. Deep grooving, rebating and mortising. Useful for template work when thickness of template restricts...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

Lip and spur dowel drills for use with the Trend Craft Dovetail Jig dowelling template. Can be used for 8mm dowels. For drilling machines or rout...

These dovetail cutters produce a tight reliable joint for drawers, boxes etc. Refs. C154 & C041A can be used with Trend CDJ300, CDJ600 & ...

Used for trimming plastic or plywood overlays.Also for copy profiling with a template.

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood ...

These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of...

All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.

Some Ovolo cutters can be used with radius cutters, to make rule joints.

These dovetail cutters produce a tight reliable joint for drawers, boxes etc. To suit user preference, the table shows angles from the horizontal ...

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a rou...

Two flute helical up-cut cutters suitable for non-ferous metals with long shank, fine finish & up-cut. Cutters are designed to plunge and machi...

Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges. Corners will require final trimm...

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut.

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a ro...