Skip to content
About Us – Northants Trade Contact Information Advice & Guides
Trade Prices. Maximum Choice.
Trade Prices. Maximum Choice.

Power Tool Accessories > Routing > Router Bits

Sold out
£136.28 - £136.28
£136.28
£136.28 - £136.28
£136.28

15/1X1/2TC - Cove cutter 19.1mm radius

Trend
Out of stock

For coves and part of a rule joint.

£136.28 - £136.28
£136.28
£136.28 - £136.28
£136.28
Sold out
Sold out
£97.18 - £97.18
£97.18
£97.18 - £97.18
£97.18

46/34X1/2TC - Bearing guided bevel cutter 25 degrees

Trend
Out of stock

Larger bearing removes the flat. Supplied with two bearings.

£97.18 - £97.18
£97.18
£97.18 - £97.18
£97.18
Sold out
Sold out
£34.66 - £34.66
£34.66
£34.66 - £34.66
£34.66

C033AX8MMTC - Two flute cutter 25.0mm diameter

Trend
Out of stock

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood ...

View full details
£34.66 - £34.66
£34.66
£34.66 - £34.66
£34.66
Sold out
Sold out
£56.98 - £56.98
£56.98
£56.98 - £56.98
£56.98

11/40X1/4TC - Panel mould cutter

Trend
Out of stock

Template thickness should be at least 5mm thicker than cutter cut length of cutter. Approximately 1.0mm flat will be found on the nose.

£56.98 - £56.98
£56.98
£56.98 - £56.98
£56.98
Sold out
Sold out
£72.70 - £72.70
£72.70
£72.70 - £72.70
£72.70

C063X1/4TC - Self guided radius 12.7mm

Trend
Out of stock

Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with.The guide bearing follows the vertical edge or template. ...

View full details
£72.70 - £72.70
£72.70
£72.70 - £72.70
£72.70
Sold out
Sold out
£16.84 - £16.84
£16.84
£16.84 - £16.84
£16.84

C007X1/4TC - Two Flute Cutter 6.3mm diameter

Trend
Out of stock

Trend Craft Pro 1/4in shank straight router cutter - 6.3mm diameter Two Flute Carbide tips Two flute carbide TCT tips for cleaner cutting edges an...

View full details
£16.84 - £16.84
£16.84
£16.84 - £16.84
£16.84
Sold out
Sold out
£72.70 - £72.70
£72.70
£72.70 - £72.70
£72.70

C066X1/4TC - Cavetto 7.9mm radius

Trend
Out of stock

Self guiding cavetto style cutter, which follow the board edges for straight or curved work radius.

£72.70 - £72.70
£72.70
£72.70 - £72.70
£72.70
Sold out
Sold out
£53.57 - £53.57
£53.57
£53.57 - £53.57
£53.57

4/60X1/4TC - Two flute cutter 22mm diameter

Trend
Out of stock

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

View full details
£53.57 - £53.57
£53.57
£53.57 - £53.57
£53.57
Sold out
Sold out
£45.91 - £45.91
£45.91
£45.91 - £45.91
£45.91

46/910X1/4TC - Guided profiler 12.7mm dia x 4mm cut

Trend
Out of stock

Profiler with shank mounted bearing guides. For use with router mounted above or below a table when following a template. For profiling and rebat...

View full details
£45.91 - £45.91
£45.91
£45.91 - £45.91
£45.91
Sold out
Sold out
£65.92 - £65.92
£65.92
£65.92 - £65.92
£65.92

C140X1/4TC - Corner bead 3.2mm radius

Trend
Out of stock

Attractive edge moulds.A full corner bead can be produced by making a second pass at 90 degrees.

£65.92 - £65.92
£65.92
£65.92 - £65.92
£65.92
Sold out
Sold out
£131.81 - £131.81
£131.81
£131.81 - £131.81
£131.81

46/38X1/2TC - Bearing guided chamfer cutter 45 degrees

Trend
Out of stock

Ideal for newel posts and caps for stairs. Supplied with one bearing.

£131.81 - £131.81
£131.81
£131.81 - £131.81
£131.81
Sold out
Sold out
£30.17 - £30.17
£30.17
£30.17 - £30.17
£30.17

C115X1/4TC - Self guided trimmer 9.5mm diameter

Trend
Out of stock

Used for trimming plastic or plywood overlays.Also for copy profiling with a template.

£30.17 - £30.17
£30.17
£30.17 - £30.17
£30.17
Sold out
Sold out
£39.10 - £39.10
£39.10
£39.10 - £39.10
£39.10

C143X1/4TC - Slotting 3.2mm cut

Trend
Out of stock

These two wing Tungsten Carbide Tipped slotting cutters are ideal for grooving and rebating operations. A 12.7mm diameter bearing is supplied with...

View full details
£39.10 - £39.10
£39.10
£39.10 - £39.10
£39.10
Sold out
Sold out
£67.62 - £67.62
£67.62
£67.62 - £67.62
£67.62

3/73DMX1/2TC - Two flute 12mm dia x 50mm cut x84mm

Trend
Out of stock

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

View full details
£67.62 - £67.62
£67.62
£67.62 - £67.62
£67.62
Sold out
Sold out
£43.60 - £43.60
£43.60
£43.60 - £43.60
£43.60

C179X12MMTC - Dovetail 19.1mm x 97 degrees x 25mm cut

Trend
Out of stock

These cutters are for Trend Craft Dovetail Jigs.

£43.60 - £43.60
£43.60
£43.60 - £43.60
£43.60
Sold out
Sold out
£28.06 - £28.06
£28.06
£28.06 - £28.06
£28.06

C041X1/4TC - Dovetail cutter angle=104 degrees x 12.7mm diameter

Trend
Out of stock

These dovetail cutters produce a tight reliable joint for drawers, boxes etc. To suit user preference, the table shows angles from the horizontal ...

View full details
£28.06 - £28.06
£28.06
£28.06 - £28.06
£28.06
Sold out
Sold out
£38.26 - £38.26
£38.26
£38.26 - £38.26
£38.26

C030CX1/2TC - Two Flute Cutter 20.0mm diameter

Trend
Out of stock

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood ...

View full details
£38.26 - £38.26
£38.26
£38.26 - £38.26
£38.26
Sold out
Sold out
£95.68 - £95.68
£95.68
£95.68 - £95.68
£95.68

C033VX1/2TC - Two Flute Cutter 47.6mm diameter

Trend
Out of stock

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood ...

View full details
£95.68 - £95.68
£95.68
£95.68 - £95.68
£95.68
Sold out
Sold out
£17.84 - £17.84
£17.84
£17.84 - £17.84
£17.84

C037X1/4TC - One Flute 6.3mm diameter x 12.7mm cut

Trend
Out of stock

Single fluted Tungsten Carbide straight cutter for fast free cutting. Single flutes should be chosen where speed and clearance rates are more imp...

View full details
£17.84 - £17.84
£17.84
£17.84 - £17.84
£17.84
Sold out
Sold out
£93.76 - £93.76
£93.76
£93.76 - £93.76
£93.76

4/30X1/2TC - Two flute cutter 18mm diameter

Trend
Out of stock

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

View full details
£93.76 - £93.76
£93.76
£93.76 - £93.76
£93.76
Sold out
Sold out
£52.49 - £52.49
£52.49
£52.49 - £52.49
£52.49

3/76X1/4TC - Two flute cutter 12.55mm diameter

Trend
Out of stock

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

View full details
£52.49 - £52.49
£52.49
£52.49 - £52.49
£52.49
Sold out
Sold out
£72.70 - £72.70
£72.70
£72.70 - £72.70
£72.70

C130X1/4TC - Corner bead 4.8mm radius

Trend
Out of stock

Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees.

£72.70 - £72.70
£72.70
£72.70 - £72.70
£72.70
Sold out
Sold out
£102.18 - £102.18
£102.18
£102.18 - £102.18
£102.18

10/50X1/2TC - Birdsmouth cutter 6&12 sided 30/60 deg

Trend
Out of stock

To make round boxes, planters, barrels or other multi-sided components. One side of the component is machined with the cutter. Fast and accurate j...

View full details
£102.18 - £102.18
£102.18
£102.18 - £102.18
£102.18
Sold out
Sold out
£50.38 - £50.38
£50.38
£50.38 - £50.38
£50.38

C172MX1/2TC - Two flute cutter 12mm diameter

Trend
Out of stock

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood ...

View full details
£50.38 - £50.38
£50.38
£50.38 - £50.38
£50.38
Sold out

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare
×

Trade Prices, Delivered

5% OFF

Join our trade mailing list and get 5% off your first order plus exclusive trade deals.

No thanks, I'll pay full price

You're In!

Check your email for your discount code.
Use code: TRADE5