Power Tool Accessories > Routing > Router Bits

The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded.

Trend Craft Pro 1/4in shank straight router cutter - 5mm diameter solid carbide insert Two flute solid carbide insert for increased strength, offer...

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood ...

Three flutes for extra fine finish. Ideal for newel posts and caps for stairs. Supplied with one bearing.

Trend Professional 1/4in shank bearing guided trimming cutter - 12.7mm diameter for laminate and template work 12.7mm diameter X 32mm cutting depth...

Self-guiding cutters with the facility to change the profile by fitting a larger bearing & varying the depth. Supplied with two bearings. T...

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut.

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood ...

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood ...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with.The guide bearing follows the vertical edge or template. ...

These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bear...

These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TC...

Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid cu...

Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with.The guide bearing follows the vertical edge or template. ...

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood ...

The two bearings supplied offer the means of cutting different depths of mouldings.

Trend Craft Pro 1/4in shank Intumescent strip cutter - 15mm width Two Flute Carbide tips. Cuts the perfect sized slot into door edges and door fram...

For use in a router table only. Take 3 - 4 passes, increasing the depth with each pass. Suitable for straight panels only.

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a ro...

The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, c...

Some Ovolo cutters can be used with radius cutters, to make rule joints.